“Introduction to Machine Safety” workshop - Congleton, 7th February 31st January session now fully booked.
“Introduction to Machine Safety” ½ day workshop.
HMK Technical Services Ltd – 7th February at 12.30pm. Kappa House, Hatter Street, Congleton, Cheshire. CW12 1QJ
Leuze electronic’s next FREE OF CHARGE “Introduction to Machine Safety” training workshop is on Tuesday 7th February, at the offices of the HMK Direct in Congleton. Thanks to the support of HMK this is the first time these popular half-day training workshops have been held close to the Midlands, in this instance Cheshire, if you’ll allow me to stretch a point.
Availability of stand-off legs for Priorclave’s range of bench-top autoclaves brings significant advantages to designated CAT 3 application areas providing much easier access beneath the priorclave for cleaning and disinfection of laboratory work surfaces to prevent spread of virus and eliminate potential cross contamination. Another added benefit of investing in a priorclave is the Biocote® antimicrobial surface protection.
The explosive nature of powdered products is well known and well documented. However, one risk that is often overlooked is static electricity build-up in road tankers. StuvEx, who have an excellent, world-wide reputation for their explosion protection systems, has achieved ATEX certification for Safe Ground, a brand new capacitive tanker earthing system.
100 Nimbus flameproof (Exd) detectors supplied to Cairn Energy’s Mangala facility in Rajasthan
100 of Crowcon’s Nimbus flameproof (Exd) hydrocarbon gas detectors have been installed at Cairn Energy’s Mangala oil and gas processing terminal in Rajasthan, India. Supplied via Larson & Toubro, the Nimbus units are located at strategic locations throughout the facility and ensure the safety of workers and equipment by detecting elevated levels of flammable hydrocarbon gases.
EDF Energy, operator of eight nuclear power stations in the United Kingdom, has qualified the STA Safety Trip Alarm from Moore Industries to the highest current integrity level assessed to any “smart” standalone process device. The integrity level of 10-3 (Probability of Failure on Demand) or SIL2 capable for nuclear safety and safety related applications is the highest level yet for smart devices that contain and operated by software or firmware.
This bursting disc was especially developed for applications with fluid and gaseous media as well as aseptic and sanitary conditions, e. g. in the pharmaceutical, biotechnology and food industries.
Many critical applications in chemical, process and vacuum technologies, aerospace, pharmaceutical, cryogenic industries, nuclear, research and technologies require specific bursting discs for easy and torque-independent installation.
REMBE provide an extensive variety of bursting disc units and designs for protection against pressure and vacuum of extruders and machinery in the plastic processing industry.
Triple-Section bursting discs are used mainly for low and medium burst pressures in many industries. The laser-cut burst element with its breaking points provides precise burst pressures and the multilayer design guarantees an operating ratio up to 80 %. Additionally the integrated sealing membrane protects the burst element against corrosion. Even at lowest burst pressures < 0.1 barg (1.45 psig) BT-ODV bursting discs up to size DN 1000 (40”) can be manufactured with full vacuum resistance.
The explosive nature of powdered products is well known and well documented. However, one risk that is often overlooked is static electricity build-up in road tankers. StuvEx, who have an excellent, world-wide reputation for their explosion protection systems, has achieved ATEX certification for Safe Ground, a brand new capacitive tanker earthing system.
_s.jpg)
