← Back to Mixing, Blending & Granulating category

Boone mixer makes short work of hazardous waste

 

New rules for managing hazardous wastes posed a challenge for leading hazardous waste management company Augean PLC.

Since November 2008, the treatment of chemical wastes prior to landfill has to be carried out under much more tightly controlled conditions. In particular, the mixing of waste with binding agents must be carried out in a closed vessel inside a building to minimise the risk of contamination to both the environment and workers.

With the legislation pending, Augean took the decision to make a substantial investment to provide the company with the most advanced treatment unit for chemical waste in the UK.
Augean’s Alec Hirst has been project manager from the beginning, and is very pleased with the results from the new plant.

“This is something new to our industry, and we are pleased with the results”

At the heart of the £1.2m project is the mixing unit, which combines the shredded waste with cement and PFA (pulverised fly ash) to form a cake which can then be safely consigned to designated hazardous landfill sites.

The plant can accept a wide variety of waste containers ranging from 1M3 IBCs through 200L steel drums and 50 L plastic drums. The operator loads, combinations of these containers onto a large infeed conveyor which delivers them to the heavy duty shredder reducing everything to 25 mm or less. The waste is then fed into the mixer with a measured amount of cement and PFA, the mixer then combines and encapsulates the waste particles with a cementicious coating. The finished product is then discharged into a skip for transport to landfill.
After loading the containers the process is remotely controlled from the computerised operator panel keeping human intervention to a minimum.

The mixing is a pretty brutal process and the mixing machine needs to be up to the job. So Augean turned to one of the most experienced companies in the business, J R Boone of Congleton, to provide the machine they were looking for.

 

A series of very successful tests were carried out in a pilot plant on a full range of wastes that showed the proposed design could meet the brief. This was scaled up into the full size unit, which comprise a 6-tonne horizontal paddle blade mixer, driven by a 132Kw motor.

The mixer consists of a semi-omega shaped mixing chamber with outboard bearings carrying a contra flow paddle blade agitator. Adjustable packed glands seal the agitator as it passes through the
ends. The mixing chamber, ends and agitator are made from carbon steel with agitator blades in wear resistant ‘Abro’ steel. The discharge is via a specifically designed heavy duty flush fitting valve.

Making the unit dust-tight was a key requirement and there is also an extraction and treatment system for volatile components.
The types of waste handled are broad and include ceramics, adhesives and resins, and centrifugal sludge from waste oil.

On a typical 16-hour day, the installation can process up to 360 tonnes of finished solidified/stabilised material for hazardous landfill.

“It’s a great piece of kit,” sums up assistant site manager Andrew Waterhouse, who looks after the equipment on a day-to-day basis. “It does exactly what it’s supposed to do.”

For further information please contact;

Chris Boone, Managing Director, John R. Boone Ltd,
18 Silk Street, Congleton, Cheshire, CW12 4DH
Tel: 01260 272 894     Fax: 01260 281 128

John R Boone Ltd

Request more info on this news / product article 

Related news

%d bloggers like this: