Sign in to PII

Remember me
Create an account Forgot your password? Forgot your username?

Latest news

Sponsored by

2 Component Metering, Mixing and Dispensing

Oct 29, 2014 | by Intertronics
Category Mixing, Blending & Granulating       Hits: 2927

Newly announced by Intertronics is the preeflow® eco-DUO600 by ViscoTec which offers precision metering and mixing of two component materials with mixing ratios adjustable up to 5:1.

It is designed for use with two component materials such as silver loaded conductive epoxies, silicones or polyurethanes which may be dispensed in small quantities for either dots or beads. Applications are forseen within micro-electronics, medical optics, LCD/LED/OLED, bio-science and a wide range of general industry where processes call for exact quantities of even fragile materials to be metered, mixed and dispensed.

Genuine volumetric, low shear dosing is achieved which is viscosity and primary pressure independent, in a pressure tight system without the need for a control valve. This enables a controllable dosing flow with suck back effect to ensure a clean cut-off and prevent post-dripping effects.

The eco-DUO600 from Intertronics features easy to clean continuous piston technology with precision drive rotor/stator for great accuracy and control to produce shot sizes from 0.03ml and with flow rates of 0.6 to 32ml per minute. The dual format set up pairs two preeflow® pumps connected to one static mixing nozzle and may be linked with the eco-CONTROL EC200-DUO controller. This enables a wide range of applications to be addressed with control over dosing, dispensing time and mixing ratio – which can be adjusted from 1:1 up to 5:1.

Operation of the controller is via an intuitive user guidance graphical interface plus an integral data exchange capability via USB connection. eco-DUO600 accepts 0-20 bar input to produce 0-40 bar blended output with an accuracy of ± 1% and greater than 99% repeatability.

Request more info on this news / product article

Fields marked with an asterisk (*) are required