Sign in to PII

Remember me
Create an account Forgot your password? Forgot your username?

Latest news

Sponsored by

ROTARY CONTINUOUS MIXER FROM MUNHSON MACHINERY

Oct 02, 2007 | by Phil Black - Editor, PII
Category Mixing, Blending & Granulating       Hits: 6922
ROTARY CONTINUOUS MIXER

A new Model "16-4SS" Rotary Continuous Mixer from Munson Machinery blends ingredients in ratios as extreme as one part per million with 100% uniformity regardless of disparities in the bulk densities, particle sizes or flow characteristics of ingredients, which may include liquid additions. Capacity ranges from 2.45 cu m/h at 1-minute residence time, to 1.19 cu m/h at 2-minutes residence time.

The slowly rotating 406 x 1219 mm cylinder contains proprietary mixing flights that impart a forward- and reverse-pitch, "back flow" mixing action that distributes bulk ingredients thoroughly and gently in short residence times, while eliminating internal restrictions where material could plug or accumulate.

An optional internal stainless steel spray line with spray head allows uniform introduction of a liquid additive to the blended material. The line is suited for spray coating, de-dusting, perfuming, agglomerating and conditioning of materials. The tumbling and cascading effect produced by internal flights is said to achieve 100 percent uniform distribution of liquids with no overspray.

Unlike designs that shift masses of material back and forth and distribute weight unevenly, the steadily rotating cylinder reportedly produces a gentle and consistent mixing action using a smaller drive motor of .37 kw. RPM may be adjusted to compensate for angles of repose and densities of different mixtures.

The drum angle can be adjusted from 0 to 12 to control product residence time and throughput rate.

Solid weirs on the discharge end act as a dam" allowing materials to build a residence volume in the machine and overflow the weir.

Dust-tight diaphragms at both the intake and discharge ends are securely retained against the mixing drum and revolving cylinders, preventing the escape of dust or fumes. Material is fully discharged at the end of a run for rapid washdown.

The mixing drum is supported by heavy-duty Nylon or hardened steel "trunnion rollers" that ride on machined "trunnion rings" for minimum power consumption and rapid maintenance.

Material contact surfaces are of #316 stainless steel finished to industrial, food, dairy, and pharmaceutical standards. Also available are carbon steel, AR-235, #304 stainless steel and specialised materials such as Duplex stainless and Hastalloy. Liners and special configurations are also available.

The company also offer large-scale Rotary Continuous Mixers with up to 14.92 kw in diameters to 152 cm and lengths to 457 cm, having capacities of 121 cu m/h at 1-minute residence time, and 59 cu m/h at 2-minutes residence time.

Other Munson blending equipment includes Rotary Batch Mixers, High Intensity Blenders, Forberg mixers, and Ribbon, Paddle and Plow Blenders. Size reduction equipment produced by the company includes Screen Classifying Cutters, Centrifugal Impact Mills, Rotary De-Clumpers, Attrition Mills, Hammer Mills and Shredders.

For more information contact Munson Machinery Company, Inc.,Utica, NY 13503 USA.

Tel: 1-800-944-6644 E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Web: www.munsonmachinery.com

Request more info on this news / product article


Fields marked with an asterisk (*) are required