← Back to Cranes & Lifting Equipment category

JC 5000 – the largest model in the Essa range

Jeavy – duty jaw crushers

A robust and dependable high capacity jaw crusher suitable for large laboratory and plant applications. The JC5000 is the largest model in the Essa range of proven and reliable heavy – duty jaw crushers.

The JC5000 finds general application in a variety of operating environments. It readily accepts soft to very hard ore, rock and large industrial particulate up to 85% of its 300mm x 500mm jaw opening.

This is a heavy duty machine suitable for use in a continuous or large batch operating environment. Typical applications will include primary crushing or large lump ore in sampling stations and pilot plants, the pre-crushing of materials being prepared for analytical or metallurgical laboratory use and in industrial production facilities.

Benefits:

  • Reduced capital cost: flexibility of use allows for continuous or batch use in laboratory and plant applications.
  • Primary crushing application: 500mm x 300mm jaw opening accepts large input feed size up to 250mm.
  • Increased productivity: high reduction ratio, with 30mm product size, results in faster and more efficient crushing with reduced process stages.
  • High throughput: fast and powerful crushing at 15 tonnes per hour throughput.
  • Increased availability: designed with a mechanically simple single toggle that is reliable and easy to maintain and repair.
  • Improved quality: easy and fast jaw gap adjustment provides good control of product sizing while minimising downtime and labour service requirements.

Other Features

  • Multi-purpose use: installation flexibility allows for use in multiple applications and operating environments.
  • Reduced operating/spares cost: extended wear part life with reversible and interchangeable jaw plates.
  • Decreased downtime and maintenance costs: long life roller bearings exhibit reliability at high load capacity.
  • Improved safety: full drive guarding enhances personal safety and complies with client OH&S standards.
  • High level motor protection: IP65 rated electric motor is totally protected against dust ingress and against low pressure water jets from any direction.

Technical data:

Jaw Inlet

500mm x 300mm

Maximum Feed Size

250 mm (85% of jaw inlet)

Usual Product Size

30 mm

Maximum Product Size

75 mm

Throughput at Usual Product Size

15,000 Kg/h

Motor Power

22 kW , 3 phase

Toggle Speed

325 strokes per minute

Dynamic Loading – Vertical

+/- 8.34 kN

Dynamic Loading – Horizontal

+/- 1.87 kN

Dynamic Frequency

5.42 Hz

Dust Extraction Points

Zero

Dust Extraction Flow

n/a

Mass

3,500 kg

Dimensions (LxWxH)

1.190mm x 765 mm x 1.370 mm

 

For more information, please click JC 5000 Jaw Crusher.

 

Endecotts

Request more info on this news / product article 

Leave a Reply