Freeman Technology will present new research at the inaugural conference on Additive Manufacturing with Powder Metallurgy (18-20 May 2014), which runs alongside the 2014 World Congress on Powder Metallurgy and Particulate Materials (PM 2014 World Congress) taking place from 19-21 May in Orlando, FL. The new research shows how the FT4 Powder Rheometer® can be used to identify metal powders that are conducive to successful performance in an additive manufacturing (AM) process. The FT4 Powder Rheometer will also be on show at the Freeman Technology booth (#120) throughout the event. To find out more about the conference or to register visit www.ampm2014.org
Additive manufacturing, also known as 3D printing, involves producing often intricate components to tight specifications by building and binding successive powder layers. The technique is gaining acceptance for the manufacture of metal components, as reflected by the inclusion of the inaugural ‘Additive Manufacturing with Powder Metallurgy Conference’ alongside this year’s PM World Congress. Successful AM relies heavily on the properties of the raw materials used, which define both process behaviour and the quality of the final product. However, the analytical methods traditionally employed for powder testing offer only basic data, producing single number parameters that rarely reflect powder behaviour across the range of unit operations used in AM.
In a presentation entitled ‘Accurately Quantifying Process-Relevant Powder Properties for AM’, Mike Delancy, Freeman Technology’s National Sales Specialist in the US, will discuss recent testing carried out to measure the properties of stainless steel powders intended for AM applications. In these experiments, the FT4 Powder Rheometer was used to measure dynamic, bulk and shear properties of the powders to fully characterise behaviour. Clear, repeatable differences were measured between the different powders which were found to correlate directly with their performance in an AM process. The study demonstrates the ability of the FT4 Powder Rheometer to support the identification of an optimal metal powder for specific AM applications.