← Back to Enviro Monitoring, Recycling & Wastewater category

Water quality measurement using the updated Ponsel Odeon

Odeon OPTOD_1

Bell Environmental are pleased to offer their new easy to use rugged IP67 water quality meter called the Odeon. The Odeon series has been designed to provide the end user with a highly flexible advanced system for people working in the water and wastewater, environmental, agricultural, and manufacturing, food and drinks sectors where instrumentation forms part of a crucial process.

This meter can accept any digital sensors from the Ponsel DIGISENS range and provide instantaneous readings for them all. The sensor options include pH, ORP, Conductivity, Dissolved Oxygen, Turbidity, TSS and Sludge Level. These probes are all ready to use and come supplied with a factory calibration certificate. Their calibration history is logged within them, and can be reviewed at any time through the Odeon meter.

Each sensor can be offered in multiple lengths allowing for even more flexibility; 3m, 7m, 15m and any length up to 100m can be customer built for your application. This makes these sensors suitable for when measuring water quality in hard to reach areas such as boreholes or wells.

Four readings at once

The Odeon meter is available in two different model types; a single channel model called Open One Line and a model called Open X Line. The Open X Line allows for up to two sensors to be connected at one time.

The Open X Line model, when coupled with a Y Cable, can also allow the user to connect up to 4 sensors to a single Odeon device. All of these are powered directly from the Odeon handheld meter, with data logging within them, which can then be downloaded to a PC and exported into programs such as excel for further data analysis.

All Odeon digital sensors also carry their calibration information on their sensor. This means that the sensor can be interchanged between Odeon devices, without the need to worry about recalibration.

Practical use of Odeon Kit

Autonomous operation option

While the Odeon has primarily been designed for use as a handheld meter, the device also offers the ability for short term autonomous operation. For example with two sensors connected, reading every one minute the meter can left for up to ten days of data collection in the field. The connectors for the sensors are waterproof using a Clic-LocTM Plug
A special extended battery pack deployment kit allows the meter to be enclosed in a waterproof IP67 case and includes an additional battery. These are both rechargeable and comes with the recharge cable in the kit. This allows for data collection autonomously for up to 1 month.

Photometer option

The Odeon can accept all of the Digisens sensors offered by Ponsel, however it also has the option to accept a device called the Photopod. The Photopod is a microprocessor based photometer with LED technology used specifically for water analysis and cannot be found anywhere else in the market. It offers 50 parameters measured by photometry and 10 by physio-chemical technology. Each parameter has its own reagent or tablet to be added for the defined water quality test to be undertaken. The Photopod microprocessor has an exceptional logger capacity allowing 100,000 measures to be taken. All these features make it practical for both field and lab work. It has the flexibility for measuring parameters that require measurement in the field and those that can be undertaken in the laboratory.

This versatile instrument can be used for a variety of applications and can measure a large number different parameters associated with water quality.

For more Information on the Ponsel Odeon meter please contact Bell Environmental via email [email protected] or call 01280 817304.

Process Industry Informer

Related news

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Share via
Copy link
Powered by Social Snap