ATEX certificated FLOAT SWITCHES from jbj Techniques Limited

Float switches types 1E-AN1 and 1E-AN2

Connecting head made in cast steel according to European standards EN 50014, EN 50018 EEX DII CT 6 [zone 1](alternative specification available on request) as covered by certificates CESI AD 82.072.

Suitable for hazardous environments where the saturation of gaseous vapours or substances that combine in air are liable to cause explosions. i.e. in the chemical, pharmaceutical or dye industries, oil rigs, etc.

ATEX certificated to directive 94/9/EC requirements

Terminal boxes used on the jbj range of hazardous area float switches types IE-AN1 and IE-AN2 are the type SDB-14 and have been ATEX certificated at source by the manufacturer in accordance with the requirements specified within directive 94/9/EC.

EEx d IIB/IIC T6 – T3, EEx d (i) IIB/IIC T6/T5, IP 66 T85° +200°C in accordance with European standards EN 50014:1997 + A1..A2, EN 50018:2000 + A1, EN 50020:2002. EN 50281-1-1.1998 + A1 and EN 60529:2001.

Comply with the requirement of the community Directive 94/9/CE for group II and category 2G/2GD/2(1)G/2(1)GD.

CE type Examination Certificate CESI 03 ATEX 191.

For further information please visit; http://jbj.co.uk/ATEXfloatswts.html

Or download a pdf from here