NEW AUTONOMOUS BATTERY POWERED CONTINUOUS CHLORINE MONITOR FOR DRINKING WATER NETWORKS

Listen to this article

Chlorine monitoring system for potable water networks

Athenea is the new chlorine monitoring system for potable water networks from Halma Water Management (HWM). It is an autonomous, battery powered chlorine analyser that provides continuous monitoring of concentration levels and transmits data automatically via cellular telemetry. This greatly reduces the need for time-consuming on-site ‘spot’ testing, and obviously allows for much more frequently updated results.

The product uses proven amperometric technology for chlorine measurement, and also records pH and temperature levels for complete and accurate analysis. By using an innovative power-saving process, battery life is maximised and a full charge will power the analyser for at least 6 months. By drawing fresh water from the network for each reading, results are always current, and as no chemicals are used in the test the water can be either re-introduced into the network or siphoned off as waste.

The result is a system that requires no external power source, can be deployed anywhere, sends results automatically to a chosen remote location, and produces accurate results comparable to those used at a mains-powered treatment works. Athenea is therefore ideally suited for installation in tanks, reservoirs and non-powered network locations. A portable version, housed in a Pelicase, is also available for survey use, where the unit’s waterproof IP68 rating could prove particularly useful.

The analyser can be calibrated and programmed remotely, and operates at a range of 0-20ppm, effective within 0-50 degrees Celsius and pH 4-8. Logged readings are then transmitted by a Radcom datalogger using GSM/SMS telemetry, providing open-protocol results compatible with any SCADA system. Athenea has already been extensively tested in Spain, where over 50 units have been deployed successfully in numerous cities. HWM also has a demonstration system installed at their test site in Cwmbran (South Wales), where interested parties are invited to view it in action and find out more about the features and benefits it can offer.

For more information contact Halma Water Management, Llantarnam Park Way Cwmbran

Tel: +44 (0)1633 489 479, Fax: +44 (0)1633 877 857

E-mail: sales@hwm-water.com Web: www.hwm-water.com
Phil Black - PII Editor

I'm the Editor here at Process Industry Informer, where I have worked for the past 17 years. Please feel free to join in with the conversation, or register for our weekly E-newsletter and bi-monthly magazine here: https://www.processindustryinformer.com/magazine-registration. I look forward to hearing from you!

Share
Published by
Phil Black - PII Editor

Recent Posts

Bredel CIP pump enhances hygienic processing efficiency

Watson-Marlow Fluid Technology Solutions has launched the Bredel CIP pump, designed to support hygienic and…

3 days ago

A reliable solution for Section 82 compliance

Process instrumentation specialist Endress+Hauser has developed a Continuous River Monitoring Solution to support UK water…

3 days ago

Pump Success Move as Borger UK Accelerates Growth in Shrewsbury

Borger UK, a leading pump manufacturer in the UK, which has firmly established itself as…

3 days ago

AkzoNobel Powder Coatings expands My Interpon Portal with on‑demand services to drive performance speed and sustainability

AkzoNobel Powder Coatings is strengthening support for UK powder coating businesses by expanding the capabilities…

3 days ago

BFM® fitting snap-in connectors installed on flour line to simplify maintenance

The Challenge BakeAway is a UK-based company that has been manufacturing high-quality dough for pastry, pancakes,…

4 days ago

Apex Pumps celebrates award-winning year of growth, investment, innovation and industry recognition

Bristol-based pump manufacturer reports record order book, major investment in UK manufacturing and wins top sustainability honour…

4 days ago