SWINDON LIFTING SUPPLIES HOISTS OF CHOICE FOR HONDA OF THE UK MANUFACTURING LTD

Listen to this article

Air operated hoists supplied by Swindon Lifting from the J D Neuhaus Mini range have been successfully deployed on the Engine Block Machining Section by Honda of the UK Manufacturing Ltd (HUM), at their South Marston Plant in Swindon. Following an initial installation in this production area some five years ago, further hoists have been subsequently supplied.

The hoists chosen for these repetitive lift operations are the J D Neuhaus Mini, with both the 125 and 250kg lift capacities being used. These are very durable, robust units, ideally suited to the conditions and environment in which they are being used. They also use far less air than many other pneumatic hoists and have proved to be a considerable improvement over the wire rope balancers previously used.

More JDN hoists have also been supplied by Swindon Lifting for other operating areas at HUM. These include 500kg capacity models, typically used by plant maintenance services for other heavy duty lifting applications, with a high degree of load control positioning accuracy.

The J D Neuhaus Mini series hoists can be supplied in four lifting capacities up to a maximum of 980kg. These are lightweight products operating at 6 bar airline pressure designed for light/medium duty manufacturing applications. They are suitable for lubrication-free operation, at lift/lower frequencies that on similarly load rated electric hoists could result in burn-out of a motor, brake or clutch. The mini hoists have a wear resistant motor braking system and are Ex rated for use in hazardous areas eg paint shops. They can be supplied with standard lift heights of 3, 5 and 8 metres and pendant controllers are fitted for extremely sensitive load controls and with an emergency safety shut-off valve also provided as standard. 

Further information is available on request to:

J D Neuhaus, 8 Herald Business Park, Golden Acres Lane, Coventry  CV3 2SY 
Telephone: 024 7665 2500               Fax: 024 7665 2555              

E-mail : info@jdneuhaus.co.uk www.jdneuhaus.co.uk

Phil Black - PII Editor

I'm the Editor here at Process Industry Informer, where I have worked for the past 17 years. Please feel free to join in with the conversation, or register for our weekly E-newsletter and bi-monthly magazine here: https://www.processindustryinformer.com/magazine-registration. I look forward to hearing from you!

Share
Published by
Phil Black - PII Editor

Recent Posts

IChemE Launches Inquiry into UK Chemical Engineering Research

The Institution of Chemical Engineers (IChemE) has announced a significant presidential inquiry into the current…

22 hours ago

UK REACH ATRm Progress Met With Caution by Chemical Industry

A Multidisciplinary Approach This research combined numerical analysis with hands-on experimentation. By employing high-speed photography…

22 hours ago

Research Finds Cast Iron Water Pipes Can Temporarily Reseal

Recent research has uncovered some exciting news about cast iron pipes—they can actually 'reseal' themselves,…

23 hours ago

Reconomy to Open £20m Plastic Recycling Plant in Corby

Reconomy, a global frontrunner in circular economy solutions, has exciting news: their brand, Eurokey, is…

23 hours ago

UK Gov Recognises Steel as a Strategic National Asset

UK Steel is thrilled to see the government officially recognize the steel industry as a…

23 hours ago

UK factories could unlock £129bn in hidden capacity

A recent report from FourJaw Manufacturing Analytics reveals that UK manufacturers have the potential to…

23 hours ago