The latest issue off PII is out now!

Read here!
Solids Handling & Processing

Low Profile Filler Accommodates Bulk Bags, Drums

Listen to this article

A new Low-Profile, Combination Bulk Bag/Drum Filler from Flexicon allows filling of bulk bags and drums in low headroom areas.

When filling bulk bags, full-length forklifting tubes integral to the rear-post fill head allow incremental height adjustments secured with hitch pins to accommodate bags of all popular sizes, from 1000 to 1500 mm tall, and widths to 1150 mm.

The filler is equipped with an inflatable bag spout seal, a feed chute dust vent, and a low-profile densification deck that de-aerates material in bags weighing up to two tonnes as they are being filled.

A remote console or wall-mounted panel houses controls to automatically inflate the bag to remove creases, open a flow control valve or start a feed device, and stop the flow of material once a preset fill weight has been gained.

The vibratory deck de-aerates and densifies material in the bag at preset set points to create a solid, stable bag, ready for shipment. Once bags are filled, the controller deflates the spout connection collar and releases the loop latches, enabling the operator to remove the palletised bag using a pallet jack or fork truck.

In drum-filling mode, the feed chute can fill one drum (shown) by weight, or multiple drums by automatically indexing to successive drums after each is filled
In drum-filling mode, the feed chute can fill one drum (shown) by weight, or multiple drums by automatically indexing to successive drums after each is filled

The unit can be switched to drum-filling mode in several seconds by positioning the swing-arm-mounted drum-filling chute under the fill head discharge port.

The attachment has an adaptable seal to handle drums measuring up to 570 mm in diameter and 900 mm in height. When filling one drum, initiating a filling cycle delivers a programmed weight of material to the drum.

When filling two, three or four drums, the feed chute automatically indexes after each drum is filled, reducing operator involvement to initiating the cycle and removing the palletised drums using a pallet jack or fork truck.

The filler is constructed of carbon steel with stainless steel material contact surfaces, and is available in all-stainless steel finished to industrial, food, dairy or pharmaceutical standards, and with material delivery systems integrated with upstream process equipment or storage vessels.

For information contact Flexicon Europe Ltd, +44 (0)1227 374710, sales@flexicon.co.uk., www.flexicon.co.uk

Flexicon Europe Ltd
Premium Package

Flexicon Europe Ltd

flexicon-europe

About us

Flexicon Corporation is a world leader in the design and manufacture of bulk handling equipment and custom-engineered and integrated plant-wide systems. Flexicon products range from individual equipment to automated systems that source bulk material from interior and exterior plant locations, transport it between process equipment and storage vessels, weigh it, blend it, feed it to packaging lines, extruders, moulding machines and storage vessels, and load it into railcars and trailers. Flexicon can also custom-engineer automated, plant-wide bulk handling and processing systems that integrate Flexicon equipment with bulk handling and process equipment of other manufacturers.

Where we supply to

UK Ireland, Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Chemicals, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Oil and Gas, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

  • FLEXICON® Flexible Screw Conveyor from Flexicon

  • BULK-OUT® Bulk Bag Dischargers from Flexicon

  • BLOCK-BUSTER® Hydraulic Bulk Bag Conditioner from Flexicon

Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Back to top button

    Join 25,000 process industry specialists and subscribe to:

    PII has a global network of suppliers ready to help...