Flexicon FP50 enables rapid conversion between batches for ASA Spezialenzyme

Maximum accuracy and flexibility for filling and stoppering

In its search for a Good Manufacturing Practices (GMP) compliant solution for filling and sealing vials in the microlitre range, ASA Spezialenzyme GmbH chose an FP50 from Flexicon Liquid Filling. The compact peristaltic system for filling and stoppering saves space in the cleanroom and provides gentle and very precise filling of small quantities.

Thanks to its versatility and the use of custom-made Flexicon single-use components, the new filling line enables rapid conversion between batches and simple adaptation to projects with larger filling quantities and vials.

ASA Spezialenzyme, based in Wolfenbüttel, Germany, specialises in the production and distribution of enzymes, microbial cultures and other innovative biotechnological products for various sectors ranging from food and beverage to paper and pulp.

The company is also active in the development and formulation of pharmacological excipients. ASA Spezialenzyme produces special enzymes, such as a newly developed adjuvant for use as an active enhancer in promising novel vaccines, including for hepatitis B and Chagas disease which are currently in the pre-clinical development phase.

A sterile process has been designed and installed in accordance with current GMP standards for the processing of the liquid-formulated adjuvants. According to GMP guidelines, high-risk operations, such as aseptic filling of sterile products, must be carried out in a class A environment.

By using a Laminar Air Flow (LAF) workbench (Class A) with glove ports installed in the clean room (Class B), the risk of contamination with microorganisms, particles and pyrogens is minimised.

“After production, the liquid is first filtered in batches and transferred into a pre-sterilised bag. Then the fill/finish operation takes place, filling 500 microlitres into pre-sterilised 2R vials, before the vials are stoppered and crimped,” explained Marc Schreiber, a researcher at ASA Spezialenzyme.

“Until recently, we used a semi-automatic filling system for such small quantities, in which the stoppering was done manually. For this project, however, a fully automatic filling and closing process had to be installed because the vials must be stoppered as quickly as possible for regulatory reasons. In order to guarantee maximum flexibility for future projects, the new fill/finish system should not only offer a certain range of fillable volumes, but also allow for rapid conversion between batches.” 

The FP50 from Flexicon Liquid Filling, a brand of WMFTS, was the perfect solution. This fully automated system processes up to 25 vials per minute. The Flexicon FP50 is particularly suitable for the production of small and medium batches in pharmaceutical research and development, biopharmaceutical development laboratories and for clinical trials. All materials and surfaces comply with GMP standards for aseptic filling for simplified validation. 

Higher accuracy without drift

The filling is carried out by a peristaltic pump with accuracy of ±1%. Stoppers can be inserted completely or partially in the case of freeze-dried products. Operation is via an easy-to-clean control panel located outside the LAF.

The pump’s unique design reduces pulsation to a minimum, allowing faster dispensing rates. This system enables a scalable and transferable process for the development and production of new preparations.

A big advantage for ASA Spezialenzyme is that the compact FP50 takes up little space in the cleanroom and the feed tray can be placed straight or laterally (L-Form). When changing to larger or smaller vials and stoppers, only two format parts need to be changed.

Since the installation of the new filling line, ASA Spezialenzyme is very satisfied with the accuracy and reliability of the Flexicon FP50. The process validation went smoothly due to the extensive Installation Qualification (IQ) and Operational Qualification (OQ) documentation and ASA Spezialenzyme is also more than satisfied with the performance in operation. 

“We process an average of one batch per week with 600 vials of 0.5 mL each,” said Marc Schreiber.

The accuracy is an impressive 1%, even with this small amount.

“Our GMP samples during filling support this high accuracy from the beginning to the end of the batch, there is no drift,” added Marc Schreiber. 

Calibration for starting a new batch is also quick and easy.

“We usually do three to five calibrations at the start of a batch or the start of the working day. By the second dose, we usually have achieved our required filling accuracy,” said Marc Schreiber. “This allows us to minimise product loss during calibration.”

Flexibility to scale up

ASA Spezialenzyme’s special enzymes are also protected due to the FP50’s simple operation and low pulsation. 

Marc Schreiber said: “The gentle filling of the peristaltic system gives us security for future projects, for example when it comes to filling sensitive antibody vaccines. Just as important is the versatility of the system: very few filling systems can offer volumes as low as 0.5 mL. The FP50 with its wide filling range will also enable us to switch to larger vials at a later stage.”

This high flexibility is also made possible using Flexicon's asepticsu fluid path solution. This pre-sterilised and double-packed single-use kit includes all fluid contacting components during the filling process, such as bags, hoses and connectors, as well as the filling needle. 

As both equipment and consumables come from a single source, ASA Spezialenzyme can be confident that all components are perfectly matched to each other and thanks to the versatility of the Flexicon FP50, it is future-proof.

“The use of the single-use sets enables us to have short set-up times and thanks to the flexibility of the system, we can also easily fill larger volumes in future projects, for example the entire product, not just an auxiliary material,” said Marc Schreiber. 

About Flexicon Liquid Filling

Flexicon Liquid Filling is a pioneer in peristaltic filling, creating flexible systems for small batches and frequent product changes. Flexicon has a wide range of peristaltic filling and sealing systems, from manual filling benchtop to semi-automatic filling.

Contact Details About Us Latest News Latest Videos

Watson-Marlow Fluid Technology Solutions

• 01326370370
• info@wmftg.co.uk
• https://www.wmfts.com/
• Bicklandwater Road, Falmouth Business Park, Falmouth, Cornwall, TR11 4RU GB
Facebook Twitter Instagram

About us

Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.

We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.

The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:

Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

• 

  Watson-Marlow to showcase Bredel CIP pump and next-generation fluid handling at PPMA 2025

  Watson-Marlow Fluid Technology Solutions (WMFTS) will unveil the latest Bredel CIP pump and its portfolio of next-generation fluid management technologies...

• 

  Watson-Marlow launches new Bredel CIP pump for beverage producers at drinktec

  Watson-Marlow Fluid Technology Solutions (WMFTS) is launching its latest innovation for the brew and beverage market; the Bredel CIP pump,...

• 

  Bredel Hose Pump Solves Ash Slurry Problem at Biomass Plant

  A Bredel 100 hose pump with an NR Transfer hose has been installed at a biomass power station in Pécs,...

• 

  Watson-Marlow Fluid Technology Solutions introduces WMArchitect Interchangeable Parts for robust single-use assemblies

  Watson-Marlow Fluid Technology Solutions (WMFTS) has introduced WMArchitect Interchangeable Parts to improve the longevity of single-use assemblies. The introduction brings...

• 

  Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut

  Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut Watson-Marlow Fluid Technology Solutions (WMFTS) will...

• 

  German Waste-to-Energy Plant Prolongs Hose Life Using Bredel NR Transfer Hoses

  Abfallverbrennungs- und Biokompost GmbH (AVBKG), the German waste processing plant, has achieved significant hose maintenance and hose life savings. Based...

• Flexicon PF7 tabletop peristaltic liquid filling machine

• Sterile ReNu SU Technology cartridge

• Quantum and ReNu SU Technology cartridge - Make sterile connections in non-sterile environments