Fluids Handling

Peristaltic pump tackles troublesome pH levels at food manufacturer saving repair and downtime costs on water treatment plant

Watson Marlow 20/09/2010

50 2 minutes read

Listen to this article

High pressure peristaltic hose pump

Leading convenience food manufacturer, Greencore Group Plc, has achieved significant savings in downtime and repair costs on the water treatment plant at its Greencore Grocery site in Selby, North Yorkshire, thanks to the installation of a Bredel SPX50 high pressure peristaltic hose pump from Watson-Marlow Pumps Group.

Greencore Grocery is one of the UK”s leading manufacturers of bottle/jar-packaged recipe products, producing a wide range of both branded and customer own-brand sauces, pickles, and soft drinks. The cleaning and change over process between different products, produces a small quantity of liquid waste (food effluent). This can lead to significant fluctuations in pH levels, from 4 up to 12 in some instances. Until recently, pH levels at Selby were corrected using 32% caustic soda (sodium hydroxide – NaOH) through the facility’s water treatment plant, which is owned and operated by United Utilities, the UK’s largest listed water company. With Greencore responsible for consumable costs, a cost-down exercise was commenced to seek an alternative to NaOH.

“The Greencore Grocery facility at Selby is a high volume plant where there can be between 10 and 26 ‘washouts’ a day depending on order schedules,” says Peter Wadsworth, Craft Technician at United Utilities. “In order to find a more cost effective method of correcting the pH in the processing machinery, we trialled a product called ‘Mag Mex 1060’, which is a magnesium hydroxide solution [Mg(OH)2], to Correct the pH levels.

Carrier water is used to dose the Mag Mex into the system at Greencore Grocery, but to do this effectively a suitable pump is required.

“To be honest we started off using fairly ‘cheap and cheerful’ dosing pumps, but this proved to be inefficient as we spent two days a week repairing them,” says Mr Wadsworth. “Because magnesium hydroxide has low solubility in water it makes for a pretty abrasive fluid. We found the grit would attack the mechanical seals and drain plugs on the dosing pumps, thus requiring repair.”

It so happened that one of United Utilities sister sites was using a peristaltic pump from Watson-Marlow, and this was subsequently recommended to the process engineering team at Selby. As a result, a Bredel SPX50 high pressure peristaltic hose pump (50mm diameter) was installed in September 2009, and ever since there have been no abrasion issues causing downtime or repair.

The reason for this successful outcome is simple: in peristaltic pump technology, nothing but the hose or tube touches the fluid, hence there is no chance of the abrasive fluid damaging pump components. The peristaltic design means there are no valves, seals or glands to repair or replace. Replacing a hose or tube takes only minutes and they are relatively low-cost items compared to spares for other pump types.

At Greencore’s Selby site, this all adds up to a low maintenance, low cost solution, which is just as well for an operation that produces around 250 million jars per annum across circa 500 different product lines.

“Any downtime in an operation of this magnitude can be very costly,” says Mr Wadsworth. “I’m sure the SPX50 paid for itself extremely quickly. In fact we are going to trial an identical pump on site for sludge transfer between tanks.

The success of the SPX50 at Greencore, Selby is indicative of a site that has received considerable investment over the past 10 years and now boasts some of the most modern, hygienic and efficient production facilities in the UK. The site has achieved the prestigious AIB accreditation, being placed in the “superior” category, achieving BRC Grade A. The site supplies every major UK retailer and exports to over 21 countries. Over 600 people are employed at the 23-acre Selby plant.

Contact Details About Us Latest News Latest Videos

Watson-Marlow Fluid Technology Solutions

01326370370
info@wmftg.co.uk
https://www.wmfts.com/
Bicklandwater Road, Falmouth Business Park, Falmouth, Cornwall, TR11 4RU GB

About us

Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.

We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.

The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:

Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Watson-Marlow to showcase Bredel CIP pump and next-generation fluid handling at PPMA 2025

Watson-Marlow Fluid Technology Solutions (WMFTS) will unveil the latest Bredel CIP pump and its portfolio of next-generation fluid management technologies...
Watson-Marlow launches new Bredel CIP pump for beverage producers at drinktec

Watson-Marlow Fluid Technology Solutions (WMFTS) is launching its latest innovation for the brew and beverage market; the Bredel CIP pump,...
Bredel Hose Pump Solves Ash Slurry Problem at Biomass Plant

A Bredel 100 hose pump with an NR Transfer hose has been installed at a biomass power station in Pécs,...
Watson-Marlow Fluid Technology Solutions introduces WMArchitect Interchangeable Parts for robust single-use assemblies

Watson-Marlow Fluid Technology Solutions (WMFTS) has introduced WMArchitect Interchangeable Parts to improve the longevity of single-use assemblies. The introduction brings...
Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut

Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut Watson-Marlow Fluid Technology Solutions (WMFTS) will...
German Waste-to-Energy Plant Prolongs Hose Life Using Bredel NR Transfer Hoses

Abfallverbrennungs- und Biokompost GmbH (AVBKG), the German waste processing plant, has achieved significant hose maintenance and hose life savings. Based...