WASTEWATER TREATMENT CHALLENGES THE FOOD SECTOR IN ANTICIPATION OF THE WATER FRAMEWORK DIRECTIVE

Watson Marlow 27/11/2008

50 3 minutes read

Listen to this article

Ashley Shepherd, UK Sales Manager at pumping specialist Watson-Marlow Bredel talks about the importance of accurate effluent treatment for the food manufacturing sector in the context of the Water Framework Directive.

The process of wastewater treatment is set to change forever with the introduction of the Water Framework Directive, which aims to rationalise and update existing water legislation, as well as improving standards of protection for the water environment. While the food manufacturing industry currently operates under fairly stringent restrictions, they are set to become much stricter.

The management of wastewater is a complex and expensive process. Manufacturers have the choice of treating their own effluent, or paying trade effluent prices. The latter option has become so costly that many companies are now setting up their own private treatment centres. This has the added benefit of allowing appropriately treated water to be recycled back into the manufacturing process; an initiative that saves both money and water.

With stricter control over effluent becoming more important, accuracy of chemical dosing is vital. Many existing pumping systems may not be able to perform to the levels that will be required by the Water Framework Directive, particularly for those wishing to recycle their own water.

Water industry representative Water UK has recently revised the guidelines on treating effluent, making them tougher, and reinforcing the importance of ensuring that polluted water doesn’t get out into the public sewerage system.

Making it easier…

In the words of Steve Ntifo, Science and Environment Adviser at Water UK: “Trade effluent consents are among the UK”s most important environment protection measures. The revised guidelines provide a clearer process and will make it easier for businesses and sewerage companies to ensure compliance with legislation.

“The guidelines also carry a strong environmental message about the composition of products and overall impact on the environment. They should give businesses an extra incentive to improve their operations and bottom line by cutting out substances that need additional treatment and so attract higher discharge consent charges.”

The water companies are also enforcing the treatment of effluent in an increasingly rigorous manner. Recently a Southall-based ethnic food company has been fined nearly £50,000 for illegally discharging oils, fats and grease into the sewerage system. Tests on their effluent showed it was three times over the allowed limit for these substances.

Though currently relatively rare, these fines are likely to become more common, and with such substantial charges, it isn’t in any business’s interests to risk the consequences of releasing inaccurately treated wastewater.

Water companies are being encouraged to become more proactive in terms of prosecuting, in line with the whole ‘polluter pays’ principle which will be affirmed by the Water Framework Directive. The message is quite clear: effectively treat your effluent or face the financial consequences. Being held up for pollution charges is likely to have a detrimental effect for a company in terms of reputation among customers and stakeholders, particularly in consideration of the UK’s current heightened environmental awareness.

Careful monitoring….

Paying closer attention to treating effluent doesn’t have to include massive system upheaval. Finding the right technology allows for a simple retrofit to meet stricter dosing requirements. Negating the need for a new integrated system, peristaltic pumps can be used as ‘add ons’ offering a combination of dosing accuracy, reliability and ease of use.

Typically peristaltic pumps are used in sampling, metering, dispensing and transfer applications and do not demand complex commissioning programs, additional check valves or hardware. Pump maintenance involves a simple tube changeover, which takes just a few minutes and can be carried out by unskilled operatives. This incredible low maintenance requirement enables a very low whole life pump cost, making peristaltic pumps far more economical than other positive displacement pump types.

Stand-alone pumps are self-priming and can be mounted externally at ground level or in a remote housing. Control can be manual or by analogue or digital signals from other instrumentation. The development of Profibus enabled pumps for release later this year will help environmental users too.

Rather than simply replacing an existing pump, peristaltics can also be used to substitute other, less flexible methods of chemical dosing. An example of this is a recent Watson-Marlow Bredel customer who previously treated effluent through dosing tablets. With the level of accuracy required today, this technique simply wasn’t sophisticated enough to offer the required treatment. By installing one of our peristaltic pumps the client, a food manufacturer, was able to fine-tune their treatment needs while avoiding the use of labour intensive equipment.

Improving the performance of a wastewater treatment plant makes economical sense in terms of reducing operating costs as well as more effective regulatory compliance. Accurate dosing avoids the need for corrective measures and ensures no excess energy is consumed.

If the Water Framework Directive is to meet its ultimate goal – that all inland and coastal waters reach ‘good’ status by 2015, a huge revision of current wastewater regulations is necessary. The sooner manufacturing companies accept full responsibility for the treatment of their effluent, the sooner pollution problems will improve and the need for water companies and regulators to enforce fines will be reduced.

Watson-Marlow Bredel Pumps, Falmouth, Cornwall
Can be contacted on
Tel: 01326 370370
Fax: 01326 376009
E-mail: support@Watson-marlow.co.uk
Web: www.watson-marlow.co.uk

Contact Details About Us Latest News Latest Videos

Watson-Marlow Fluid Technology Solutions

01326370370
info@wmftg.co.uk
https://www.wmfts.com/
Bicklandwater Road, Falmouth Business Park, Falmouth, Cornwall, TR11 4RU GB

About us

Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.

We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.

The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:

Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Watson-Marlow to showcase Bredel CIP pump and next-generation fluid handling at PPMA 2025

Watson-Marlow Fluid Technology Solutions (WMFTS) will unveil the latest Bredel CIP pump and its portfolio of next-generation fluid management technologies...
Watson-Marlow launches new Bredel CIP pump for beverage producers at drinktec

Watson-Marlow Fluid Technology Solutions (WMFTS) is launching its latest innovation for the brew and beverage market; the Bredel CIP pump,...
Bredel Hose Pump Solves Ash Slurry Problem at Biomass Plant

A Bredel 100 hose pump with an NR Transfer hose has been installed at a biomass power station in Pécs,...
Watson-Marlow Fluid Technology Solutions introduces WMArchitect Interchangeable Parts for robust single-use assemblies

Watson-Marlow Fluid Technology Solutions (WMFTS) has introduced WMArchitect Interchangeable Parts to improve the longevity of single-use assemblies. The introduction brings...
Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut

Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut Watson-Marlow Fluid Technology Solutions (WMFTS) will...
German Waste-to-Energy Plant Prolongs Hose Life Using Bredel NR Transfer Hoses

Abfallverbrennungs- und Biokompost GmbH (AVBKG), the German waste processing plant, has achieved significant hose maintenance and hose life savings. Based...