Process control systems in almost every industry are becoming more complex; they are subject to greater scrutiny due in part to the demand for improved efficiency, regulatory compliance and higher levels of automation and plant integration.
The need for bespoke or low volume system design is also growing as a result. Bürkert has addressed this challenge by developing the Systemhaus approach, where regional technology solutions centres sit between the sales offices and larger-scale manufacturing facilities, solving problems and building innovative systems on-demand.
Neil Saunders, UK General Manager for Bürkert, explains: “The market for small volume, specifically tasked control systems is certainly growing and the operational environments in which this equipment is working are complex and governed by a considerable amount of legislation such as ATEX or food and pharmaceutical safety and cleanliness standards for example.
End users realise that transferring the responsibility of meeting these demands to a trusted supplier can reduce costs and increase operational efficiencies.”
“The diversity of requirements and the global appetite for these systems means that manufacturers need to take a new approach in order to meet demand. Bürkert manufactures over 100,000 different products for example, typically valves, actuators, sensors, controllers and combined devices.
Applying these products to scenarios that require specialist assemblies requires skill and experience as well as an imaginative approach, but without the volume constraints of large scale production runs. This is where we use our Systemhaus network.”
The definition of a bespoke control system means that the designers have to start from the ground up, working closely with the client to establish what will be delivered by the new system and how best to achieve it. Often existing technology and components will have to be integrated with unique parts and custom designs in order to achieve the best solution.
The principle of outsourcing this type of project is considered by the vast majority of OEMs as an essential part of manufacturing strategy that allows them to remain competitive in a rapidly changing global market.
In practical terms this strategy can deliver a number of improvements such as reducing supply chain management costs while improving production agility and the use of internal resources.
Jens Fuhrmann, General Manager at Bürkert’s Dortmund Systemhaus, comments: “Modern process control systems can encompass a huge range of parameters, deliver micron levels of accuracy and repeat millions of cycles, all the while recording data for standards compliance or historic analysis. However, designing, building and delivering a new process control system requires considerable expertise and flexibility, as well as an in-depth knowledge of the industry standards and specifications.”
“The most effective way of delivering a bespoke project is to assign a team that contains all the necessary skills and expertise to design, simulate, prototype, construct and test the finished product. Working closely with the client, this team has the ability to ensure the most efficient methods are used to develop an idea into the completed design.
“These teams can procure all the necessary components, both from our own product lines and from external suppliers in order to achieve the most effective solution for the client. At the same time all the components must be seamlessly integrated and work together to deliver the required control structure and meet the necessary industry standards.”
Each industrial sector has its own requirements and these must be adhered to if any new product is to be accepted under the current certification scheme.
There are statutory requirements of HACCP (Hazard Analysis and Critical Control Points) for the food processing industry that set very precise standards with regards to cleanliness, safety and product quality. These standards are aimed to protect the consumer and they are enforced rigorously in most countries by regulation.
Industries that are required to adhere to stringent hygiene regulations need process control systems that will seamlessly integrate into the existing, predominantly stainless steel process structure. Bürkert ensures that all pipework associated with a design is fabricated and welded by engineers that are ASME (American Society of Mechanical Engineers) coded for process piping.
Similarly, components and systems operating in potentially explosive atmospheres must be suitably tested and certified as safe for such an environment using the ATEX and IECEx standards.
This is an area that requires considerable expertise and design knowledge in order to deliver a packaged solution, typically on a skid or in a cabinet that is tested and guaranteed to operate safely once installed.
Neil Saunders concludes: “The benefits of collaborating with an industry leader that has the resources and expertise to deliver bespoke or short run projects should not be underestimated.
The potential to reduce manufacturing lead times and costs as well as providing a guaranteed fixed cost of ownership allows a client to concentrate on their core business and improve their own productivity.
“The depth of knowledge and experience within Bürkert ensures that the finished solution will fully satisfy the client’s expectations. The completely in-house build programme will ensure that all the necessary components, including HMIs, PLCs and their programming will be integrated and ready to connect with the host system.
We continue to support all our customers with their own projects, however, sometimes you need the scope and resource of an original equipment manufacturer to deliver. The fact that we are using our Systemhaus resources more and more in the UK just serves to underline the fact that the market has changed and will continue to do so.”
Kirsty Anderson
Bürkert Fluid Control Systems
Fluid Control Centre, 1 Bridge End, Cirencester, Gloucestershire, GL7 1QY, United Kingdom
Tel: +44 (0)1285 648720 Fax: +44 (0)1285 648721
Email: kirsty.anderson@burkert.com
Web: www.burkert.co.uk
Burkert Fluid Control Systems
- 01285648720
- sales.uk@burkert.com
- http://www.burkert.com/
- Fluid Control Centre 1 Bridge End Gloucestershire Cirencester GL7 1QY GB
About us
Bürkert is present in thirtyfive countries around the world. We also work with a large network of distributors and partners, which means we are as close as possible to our customers. This global presence ensures full service and support to all of our customers in every country around the world. Research is the lifeblood of our company.
At Bürkert, we are never satisfied with the status quo and are continually seeking new technologies and solutions for our customers. Every year, our people develop new and highly advanced products and solutions, ranging from integrated process measurement and control units to the most sophisticated systems used in pharmaceutical research. To be a market leader, we are also an R&D leader.
Therefore, our investment in research & development is one of the highest in our industry. In our research centres in Germany and France, 150 people are committed to working for a common future for our company and our customers. We are committed to offering our expertise wherever it is needed, anywhere in the world. This global presence ensures that our advances in fluid control technology are also global.
What we do in a nutshell
Manufacture of process equipment. One of the few manufacturers to provide solutions for the complete control loop.
Where we supply to
UK Ireland, Europe
Industries we supply to
Food and Beverage, Pharmaceutical Cosmetics Toiletries, Water and Wastewater
-
Surface Acoustic Wave (SAW) Technology: Advanced Flow Measurement and Biofilm Prevention in WFI Loops
Bürkert, a leader in flow control solutions, has introduced an innovative flowmeter that employs Surface Acoustic Wave (SAW) technology. This...
-
Bürkert Launches Ultra High-pressure Valves For Hydrogen Applications
Liquid and gas flow control specialist Bürkert has launched a range of valves designed to control ultra high-pressure flow for...
-
A Question Of Reliability: Supply And Control Devices For Industrial Printers
In the world of industrial and commercial printing, the efficiency and precision of ink supply and control systems are crucial...
-
UK’s first hydrogen kiln test rig helps manufacturers make a sustainable switch
A hydrogen-fuelled kiln test rig is helping brick and ceramics manufacturers to support the energy transition. In a UK first,...
-
Bürkert’s OALAB simplifies chlorine measurement for industrial carbon filters
Common in pharmaceutical, food and beverage applications, industrial high-rate granular activated carbon (GAC) filters remove chlorine from water supplies, safeguarding...
-
Tradition benefitting from technology: Controlling the brewing process
The food and beverage industry is continually evolving, driven by the need for enhanced efficiency, quality, and safety. Central to...
-
FLOWave | Oil dosing (English)
-
Feldbus Gateway Modul ME43: How to operate FLOWave (DE)
