Prevent Oxidation, Corrosion & Improve Wear Resistance Using Modern Coatings Technology

Burkert 17/05/2017

163 4 minutes read

Listen to this article

Achieving the best result with coating technologies from Ion Implanting, PVD and CVD, to Thermal spray and Welding

Modern coatings technology has been advancing rapidly in recent years; used to prevent oxidation, corrosion and improve wear resistance as well as provide protection from high temperatures, manufacturers are keen to exploit new coatings to improve the durability of their products.

However, not all coatings are the same and the quality of the final product relies on high quality equipment and expert application techniques.

Tony Brennan, Field Segment Manager Gas & Micro for Bürkert, looks at the various technologies used today and how they benefit modern industry.

From everyday high speed steel drill bits to gas turbine blades, modern surface coatings are being used to improve the performance of a wide range of components. There are several choices of application method and an almost unlimited number of coating materials. The key to achieving a successful combination is selecting an experienced specialist that can offer advice on the most suitable process and deliver it using high quality equipment.

Finding the best process

The most wide-ranging group of processes is thermal spray coatings, which can be applied using several different processes

Conventional flame spray: the wire or powder spray material is melted in a gaseous oxygen-fuel flame. The fuel gas can be acetylene, propane or hydrogen. The wire is fed into the flame, where it is melted and atomized by the addition of compressed air that also directs the melted material towards the workpiece surface.
Electric arc wire spray: an arc is formed by contact of two oppositely charged metallic wires, usually of the same composition, which leads to melting at the tip of the wire material. Air atomizes the melted spray material and accelerates onto the substrate. The rate of spray is adjusted by appropriate regulation of the wire feed as it is melted, so a constant arc can be maintained.
Plasma spray: A high frequency arc is ignited between an anode and a tungsten cathode. The gas flowing through between the electrodes, such as helium, hydrogen, nitrogen or mixtures of them, is ionized such that a plasma plume several centimetres in length develops. The temperature within the plume can reach as high as 16000° K. The spray material is injected as a powder outside of the gun nozzle into the plasma plume, where it is melted and hurled by the gas onto the substrate surface.
High velocity oxy-fuel spray (HVOF): This is a relatively recent addition to the family of thermal spray processes. It uses a supersonic jet, setting it apart from conventional flame spray, the speed of particle impact on the substrate is much higher, resulting in improved coating characteristics. The mechanism differs from flame spraying by an expansion of the jet at the exit of the gun. Fuel gases of propane, propylene, acetylene, hydrogen and natural gas can be used, as well as liquid fuels such as kerosene.

In addition to the thermal spray coatings, other processes are available; the most suitable is usually dependent on the substrate temperature and the coating thickness:

The chemical and physical vapour deposition processes both operate in a similar manner but they are considerably more complex than the thermal spraying techniques.

CVD uses precursors that are in a gaseous state, whereas in PVD the raw materials start the process in a solid state. In both cases the component is placed in a vacuum chamber where it is bombarded by high energy ions or electrons and heated to a high temperature.

There are a wide range of coatings that can be used, such as metal oxides, nitrides, carbides and similar materials, all of which are combined with a mixture of gases in the vacuum chamber.

CVD processes are used for complex components that are difficult to coat with thermal spray methods to create very hard surface layers, but are conducted at temperatures in excess of 850 °C. These high temperatures limit the selection of possible substrates, because structural changes and partial deformations can take place during the cooling stage.

Calculating benefits

One of the most important uses of thermal sprayed coatings is for wear protection. In these applications, ceramics, and above all, carbide materials are used. Here, the carbide hard phases exhibit excellent resistance against abrasive and erosive wear, and are embedded in a ductile matrix of cobalt.

Low carbon, unalloyed steel and cast iron materials are susceptible to rust and therefore often need constant surface protection. This can be produced by flame sprayed coatings of aluminium or zinc. For high temperature applications, protective coatings of MCrAlY (M = Fe, Ni or Co) materials can be used. These are usually applied using controlled atmosphere plasma spray.

Ceramic materials are excellent thermal and electrical insulators; they also possess good oxidation and wear resistance characteristics. These materials are quite useful on engine and turbine components as thermal barrier coatings, which lower the skin temperature of the substrate, thereby extending the useful service life of the component.

These coating systems consist of a bond coat, which is usually an oxidation resistant MCrAlY and a ceramic top coat. An yttrium-stabilized zirconium oxide material is often used for the top coat because of its good thermal shock characteristics.

Achieving the required standard

Central to every coating process is the control of the both the plasma gases and the reactive gases that need to be precisely metered and controlled in order to deliver the required specification of coating.

The more complex procedures, such as CVD and PVD use a large amount of heat that requires carefully managed cooling systems to ensure the base components are not adversely affected by the heat.

Companies that offer coating services often create their own bespoke equipment to ensure that the processes they have developed over many years are rigorously maintained.

As part of this process it is essential that the control of numerous gases is achieved with absolute precision and reliability. This requires expert gas control engineering techniques and designs that can be easily integrated with the other aspects of the process.

As experts in the field of fluid control, Bürkert offers a comprehensive range of individual products, such as solenoid valves, mass flow controllers, flow meters and temperature sensors that can be integrated into existing equipment.

In addition, the highly skilled design engineers are able to create bespoke flow control systems that be integrated with new designs to deliver a comprehensive coatings solution.

Kirsty Anderson
Bürkert Fluid Control Systems
Fluid Control Centre, 1 Bridge End, Cirencester, Gloucestershire, GL7 1QY, United Kingdom
Tel: +44 (0)1285 648720 Fax: +44 (0)1285 648721
Web: www.burkert.co.uk
Email: kirsty.anderson@burkert.com

Contact Details About Us Latest News Latest Videos

Burkert Fluid Control Systems

01285648720
sales.uk@burkert.com
http://www.burkert.com/
Fluid Control Centre 1 Bridge End Gloucestershire Cirencester GL7 1QY GB

About us

Bürkert is present in thirtyfive countries around the world. We also work with a large network of distributors and partners, which means we are as close as possible to our customers. This global presence ensures full service and support to all of our customers in every country around the world. Research is the lifeblood of our company.

At Bürkert, we are never satisfied with the status quo and are continually seeking new technologies and solutions for our customers. Every year, our people develop new and highly advanced products and solutions, ranging from integrated process measurement and control units to the most sophisticated systems used in pharmaceutical research. To be a market leader, we are also an R&D leader.

Therefore, our investment in research & development is one of the highest in our industry. In our research centres in Germany and France, 150 people are committed to working for a common future for our company and our customers. We are committed to offering our expertise wherever it is needed, anywhere in the world. This global presence ensures that our advances in fluid control technology are also global.

What we do in a nutshell

Manufacture of process equipment. One of the few manufacturers to provide solutions for the complete control loop.

Where we supply to

UK Ireland, Europe

Industries we supply to

Food and Beverage, Pharmaceutical Cosmetics Toiletries, Water and Wastewater

Surface Acoustic Wave (SAW) Technology: Advanced Flow Measurement and Biofilm Prevention in WFI Loops

Bürkert, a leader in flow control solutions, has introduced an innovative flowmeter that employs Surface Acoustic Wave (SAW) technology. This...
Bürkert Launches Ultra High-pressure Valves For Hydrogen Applications

Liquid and gas flow control specialist Bürkert has launched a range of valves designed to control ultra high-pressure flow for...
A Question Of Reliability: Supply And Control Devices For Industrial Printers

In the world of industrial and commercial printing, the efficiency and precision of ink supply and control systems are crucial...
UK’s first hydrogen kiln test rig helps manufacturers make a sustainable switch

A hydrogen-fuelled kiln test rig is helping brick and ceramics manufacturers to support the energy transition. In a UK first,...
Bürkert’s OALAB simplifies chlorine measurement for industrial carbon filters

Common in pharmaceutical, food and beverage applications, industrial high-rate granular activated carbon (GAC) filters remove chlorine from water supplies, safeguarding...
Tradition benefitting from technology: Controlling the brewing process

The food and beverage industry is continually evolving, driven by the need for enhanced efficiency, quality, and safety. Central to...