CASELLA ETI AWARDED mCERTS APPROVAL FOR MULTI-GAS ANALYSER
Casella ETI, the UK”s leading manufacturer of air quality, pollution detection and industrial emissions monitoring equipment, is proud to announce that the MCA04, has successfully attained mCERTS approval. The MCA04 is a non dispersive infra-red (NDIR) photometer suited to monitor process emissions from exhaust flues and can also be used as a process control analyser.
The MCAO4 has the capacity to monitor up to eight gas components with a maximum of seven infra-red active gases (CO, NO, SO2, HCl, NH3, H2O, CO2) and O2 (measured using a Zirconium Oxide cell). Total Organic Compounds (VOCs) can also be monitored with an optional flame ionisation detector.
The MCA04 Multi-Gas Analyser is designed to measure gas samples as ‘Hot / Wet’, avoiding the use of high maintenance sample drying components.
The system extracts a sample of the flue gas from the stack, via a heated sample line to the analyser, and continues to analyse the sample at 185ºC, ensuring that it remains above the sample dew point. At the heart of the analyser is the optical bench which has been orientated to revent excessive wear on gold plated mirrors as found with other emission systems and also has no complicated line up procedures.
The 19” rack mounted photometer, is ideally suited for “hot swapping” which helps with compliance to the operational downtime guidelines as set down in the Waste Incineration Directive (WID).
The measured concentrations of each gas, as well as status and operational messages, are displayed on the front panel of the MCA04 analyser module. All adjustments to the analyser can be made on the keyboard next to the LCD display. Remote diagnostics and adjustments are also available via an integrated modem, thus ensuring a rapid response to any queries by the Casella ETi Service Engineering team.
The MCA04 Multi-Gas Analyser offers users cost effective, high quality German manufacture, with excellent attention to detail, but without the price tag. The proven MCA04 photometer technology ensures high reliability and long, uninterrupted operation with minimal maintenance requirements.
mCERTS approved and permitted measuring ranges:
* SO2 0 to 75 mg/m3 and 0 to 300 mg/m3
* NO 0 to 200 mg/m3 0 to 395 mg/m3
* CO 0 to 75 mg/m3 0 to 300 mg/m3
* HCl 0 to 15 mg/m3 0 to 90 mg/m3
* NH3 0 to 20 mg/m3 0 to 75 mg/m3
* O2 0 to 25 %vol
* CO2 0 to 20 %vol
* H2O 0 to 40 %vol
mCERTS is the Environment Agency”s Monitoring Certification Scheme within which environmental measurements can be made in accordance with the Agency”s quality requirements. The scheme covers a range of monitoring, sampling and inspection activities. mCERTS promotes public confidence in monitoring data and provides the industry with a proven framework for choosing monitoring systems and services that meet the Environment Agency”s performance requirements.
For more information contact CASELLA Measurement, Kempston, Bedford,
Tel: +44 (0)1234 844100, Fax: +44 (0)1234 841490
Email: info@casellameasurement.com, Web:www.casellameasurement.com
