Compact Control Cabinet Solution For Cost-effective Water Analysis
Fully automated iron measurement and documentation. It is quite time-consuming to constantly check the iron content in drinking water manually. The Bürkert Online Analysis System with the MS06 iron analyser for photometric iron measurement does this fully automatically, includes several measuring points and allows long maintenance intervals
The continuous monitoring of important quality parameters is just as essential for drinking water procurement and water production in the food and pharmaceutical industries as it is for seawater desalination or wastewater treatment.Â
For many applications, the iron content in water is an essential measured value – it causes deposits, turbidity or affects the taste of food. Thus, the water with a high iron content is automatically filtered, but the purified water is then usually tested manually by taking a sample on site. The water analysis experts at Bürkert Fluid Control Systems offer a compact, fully automated solution for such applications that enables continuous flow injection analysis (FIA) based on photometric iron analysis via an iron analyser.Â
If required, the system can be expanded by several sampling points at low cost. Additional sensor modules can be used for flexible measuring of all relevant water parameters and thus increase process reliability. Like all sensor cubes, the iron sensor can be easily integrated into a Bürkert Online Analysis System – for example as a robust IP65 Type 8906 control cabinet solution.Â
The water analysis in the compact control cabinet is then customized to meet user’s needs and includes pH value, chlorine and chlorine dioxide, ORP value, turbidity and conductivity measurements, all in addition to iron. All sensors are either maintenance-free or have long maintenance intervals and can thus be operated in a resource-saving way.
Compact iron measurement:
The iron analyser determines the iron content in the range from 0 to 2 mg/l; larger detection ranges are available on request. To do this, process water is automatically sampled in cycles at up to four different sampling points and measured with the sensor by means of flow injection analysis.Â
Rinsing, sampling, adding of reagent, mixing and photometric analysis all run automatically. The result can be stored in the system or on the higher-level PLC using a data logger. The optimized measuring device requires only 50 µl for each reagent per measurement. This means that one storage bottle is sufficient for approx. 5,000 measurements.Â
The self-calibrating system allows measurement intervals of 60 min between measurements. The operating pressure is 1 bar. Automated cleaning and EDIP-compatible communication (Bürkert’s own Efficient Device Integration Platform) allow quick installation and easy integration into process automation.
Further information can be found here
Burkert Fluid Control Systems
- 01285648720
- sales.uk@burkert.com
- http://www.burkert.com/
- Fluid Control Centre 1 Bridge End Gloucestershire Cirencester GL7 1QY GB
About us
Bürkert is present in thirtyfive countries around the world. We also work with a large network of distributors and partners, which means we are as close as possible to our customers. This global presence ensures full service and support to all of our customers in every country around the world. Research is the lifeblood of our company.
At Bürkert, we are never satisfied with the status quo and are continually seeking new technologies and solutions for our customers. Every year, our people develop new and highly advanced products and solutions, ranging from integrated process measurement and control units to the most sophisticated systems used in pharmaceutical research. To be a market leader, we are also an R&D leader.
Therefore, our investment in research & development is one of the highest in our industry. In our research centres in Germany and France, 150 people are committed to working for a common future for our company and our customers. We are committed to offering our expertise wherever it is needed, anywhere in the world. This global presence ensures that our advances in fluid control technology are also global.
What we do in a nutshell
Manufacture of process equipment. One of the few manufacturers to provide solutions for the complete control loop.
Where we supply to
UK Ireland, Europe
Industries we supply to
Food and Beverage, Pharmaceutical Cosmetics Toiletries, Water and Wastewater
-
Surface Acoustic Wave (SAW) Technology: Advanced Flow Measurement and Biofilm Prevention in WFI Loops
Bürkert, a leader in flow control solutions, has introduced an innovative flowmeter that employs Surface Acoustic Wave (SAW) technology. This...
-
Bürkert Launches Ultra High-pressure Valves For Hydrogen Applications
Liquid and gas flow control specialist Bürkert has launched a range of valves designed to control ultra high-pressure flow for...
-
A Question Of Reliability: Supply And Control Devices For Industrial Printers
In the world of industrial and commercial printing, the efficiency and precision of ink supply and control systems are crucial...
-
UK’s first hydrogen kiln test rig helps manufacturers make a sustainable switch
A hydrogen-fuelled kiln test rig is helping brick and ceramics manufacturers to support the energy transition. In a UK first,...
-
Bürkert’s OALAB simplifies chlorine measurement for industrial carbon filters
Common in pharmaceutical, food and beverage applications, industrial high-rate granular activated carbon (GAC) filters remove chlorine from water supplies, safeguarding...
-
Tradition benefitting from technology: Controlling the brewing process
The food and beverage industry is continually evolving, driven by the need for enhanced efficiency, quality, and safety. Central to...
-
FLOWave | Oil dosing (English)
-
Feldbus Gateway Modul ME43: How to operate FLOWave (DE)
