Emerson Completes NMi Certification of Calibration Facilities at its European Flow Centre
Emerson Process Management announces the completion of the certification of all three flow calibration test facilities at its European Flow Centre. This certification by the internationally recognised NMi (Nederlands Meetinstituut) further extends the traceable calibration capability of the Flow Centre. The new flow calibration facilities are purpose designed for the flow and density calibration of Emerson’s Micro Motion® Coriolis flowmeters. Flow ranges from 0.13 kg/min up to as high as 18,000 kg/min of water are now covered. This range will allow calibration and certification of the full range of Micro Motion Coriolis flowmeters supplied up to line sizes of a nominal diameter of 200 mm (8”).
The certification by NMi on the flow stands identifies the Calibration and Measurement Capability (CMC) with a value up to 0.017% for mass and 0.07 kg/m3 for density, to enable the calibration of all Micro Motion models. These capabilities cover the calibration of the most accurate model, the ELITE™ CMF series Coriolis flowmeters, having an optional specification of 0.05 % for mass and 0.2 kg/m3 for density. This higher accuracy option is very useful for critical applications or when the meters are used as master meters to calibrate other meters in the field. All stated CMC values exceed the specified accuracy with a factor of at least 3.
Subscribe to PII and receive:
Our long-established bi-monthly digital magazine *Process Industry Informer*, featuring exclusive articles, news and updates across the Process Industries, plus commentary from our three industry experts:
Sean Moran
Gavin Smith
Dave Green
PLUS:
- Process Industry Update — our weekly e-newsletter
- PII Podcast
- Special messages from our advertising partners
The European Flow Centre, along with other centres around the world, represents Emerson’s global capability and commitment to customer service and support. Opened in 2007, The European Flow Centre is situated at Ede, between Arnhem and Utrecht in The Netherlands and offers ‘state of the art’ test areas for different flow products and flow range calibrations and all fully traceable. In addition the Flow Centre offers extensive product demonstration and customer training areas, and is the headquarters for sales and support staff. The Customer Service Centre provides multi-lingual sales and service support to customers throughout Europe.
Emerson Process Management, Horsfield Way, Bredbury, Stockport SK6 2SU UK
Tel: 0870 240 1978 (UK) +44 870 240 1978 (Int)
Fax: 0870 240 4389 (UK) +44 870 240 4389 (Int)
Email: uk-irelandsales@EmersonProcess.com
Web: www.EmersonProcess.eu
