Filter Effectiveness Testing Using Flowmeters

Titan Enterprises 16/04/2020

298 1 minute read

Listen to this article

Titan Enterprises reports on how its flowmeters are being used by filter manufacturers to test the effectiveness of their products.

Filters are used in many processes to remove particulates from a fluid or gas flow. A typical liquid filter efficiency testing procedure uses a simple circuit consisting of a fluid reservoir, contaminant to be removed injection point, a pump and the filter under test.

Monitoring of the loop is usually done using particle counting equipment before and after the filter to test the removal efficiency. In addition, the set-up uses a differential pressure gauge to monitor the pressure loss across the filter when a known amount of added contaminant has been removed by the filter.

And finally, a flowmeter, usually installed after the filter, is used to measure the volumetric throughput of fluid through the system.

Using this set-up – particle size and contaminant removal efficiency can be recorded giving vital technical information for a filter manufacturer, filtration equipment supplier and ultimately more information for a process engineer to aid their selection of the optimum filter for their application.

Over recent years, Titan Enterprises has worked with several filter manufacturers to develop optimised flowmeters to meet the different demands of their particular test rigs.

These flowmeters range from quite low flow devices through to larger systems and even bypass filtration systems. In bypass filtration applications – a continuous measurement is made of the flow through the filter where the majority of the flow bypasses the element but the proportion that is filtered is usually to a much higher level than could be readily achieved with a full flow filter. Over time the whole of the fluid is thus filtered to a very high standard.

For further information on flowmeter set-ups for helping test the efficiency of your filtration products please contact Titan Enterprises on +44-1935-812790 / sales@flowmeters.co.uk or visit www.flowmeters.co.uk

Contact Details About Us Latest News Latest Videos

Titan Enterprises Limited

01935812790
sales@flowmeters.co.uk
http://www.flowmeters.co.uk
Unit 2 5a Coldharbour Business Park, Sherborne Dorset, DT9 4JW GB

About us

With over 40-years experience in flow meter innovation, Titan Enterprises Ltd are a UK-based manufacturer of high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flow meters and the low flow Turbine flow meters and instrument range.

Our knowledgeable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application whether it is a low cost OEM solution or a specialist flowmeter in exotic materials. Titan supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical, offshire oil & gas industry, power, chemicals and mining.

For higher volume users we can custom design a flowmeter to match exact application requirements and thus not compromise achievable results with a less than ideal sensor.

At Titan we endeavour to produce devices that are inherently reliable as well as manufactured using the latest and most economical production technology. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.

We produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.

What we do in a nutshell

Titan Enterprises is a leading UK manufacturer and international supplier of high-performance liquid flow measurement solutions. We specialise in the design and production of small-bore, affordable off-the-shelf flow meters to bespoke flow sensors designed to customer specifications meeting specific flow ranges and environmental conditions.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Something interesting you may not know about us:

Titan's R&D spend is 20% of our turnover where the industry norm is 8-10%.

Precision and protection: Titan’s 800 Series flowmeters power peracetic acid dispensing systems

In modern medical pharmaceutical and hygiene applications, peracetic acid, commonly known as PAA, has become one of the most trusted...
Titan Enterprises Scoops “Highly Commended” Accolade for Manufacturer of the Year at Annual Awards

Titan Enterprises, a leading UK-based flowmeter manufacturer in Dorset, is proud to announce it has been Highly Commended in the...
Titan Enterprises Beverage Flow Meters: Turbine vs Ultrasonic – Which is Best for Your Application?

Selecting the right flow measurement technology is essential for reliable drinks dispensing, beverage production, and wider food and drink processing...
Titan Enterprises Develops Custom Calibration Rigs to Push New Frontiers in Ultrasonic Ultra-Low Flow Measurement

Titan Enterprises has issued a technical paper outlining the research and resolution of calibration issues that were encountered during the...
Optimising Hydraulic Performance: Precision Flow Measurement Challenges

Titan Enterprises shares practical insights to help engineers and operators address the challenges of precision flow metering, ensuring accurate measurements...
Why Total Cost of Ownership (TCO) Is Greater Than Purchase Price in Flow Measurement Systems

Titan Enterprises stresses the intangible cost benefits of low-maintenance, long-life flow meter technology where performance is balanced with long-term value.When...