Energy & Power, Heating, Cooling & Drying

Free training course on how to manage steam safely & efficiently

Burkert 08/01/2014

117 4 minutes read

Listen to this article

Steam is used in a wide range of industries for a variety of processes, from a basic small heating circuit to large scale hygienic steam production. Greg Sutcliffe, Global Segment Manager at Bürkert looks at some of the basic principles that should be understood by maintenance engineers and facilities managers in order to achieve a safe and efficient process.

Modern production environments require the maintenance team to be experts in a vast range of fields and while many areas may be adequately covered, steam equipment can sometimes be overlooked. This can lead to costly breakdowns or repairs which could have been avoided if some basic principles were better understood.

1. Velocity – Steam should be dry, and only minimal water content should be the target, but it is often present as entrained water and condensate. These phenomena can be damaging and wearing to the steam system – particularly at high velocities. As a general rule of thumb, pipe sizes are typically calculated using 25m/sec as the reference speed. This forms a crucial part of the design, to reduce the impact of water hammer, pitting and wear.

2. Water Hammer – Poor condensate management can lead to water hammer; a condition that should never be tolerated. As the steam travels over condensate in a steam line, it drags a “slug” of condensate along with it. Due to the mass and velocity of the “slug” it can contain large amounts of kinetic energy, which is dissipated when it hits an obstacle such as a valve or pipe elbow. The results can be mechanically destructive to plan and extremely dangerous to personnel, so every effort should be made to design and maintain an excellent condensate management regime and eliminate water hammer.

3. Installation of Strainers – Y-type strainers are needed to protect expensive and process-essential equipment from damage and faults due to debris in the steam. However, installed incorrectly they are a potential source of condensate pooling and water hammer. When installed in the steam line, y-type strainers should be installed NOT in the “belly-down” position, but with the “belly” of the strainer in the horizontal plane – an issue Bürkert has seen on several occasions while fault finding on systems it has been called in to assess.

4. Pipe reducers – It may be necessary to reduce the pipe diameter as part of the steam system design. On steam systems, it is essential that eccentric reducers are used, rather than concentric parts, with the flat side at the bottom. Concentric reducers have a funnel-like profile and are sometimes installed by less informed Engineers or when costs are being cut; however this will lead to pooling of condensate and can be a prime source of water hammer.

5. Equal T”s – As a general rule, when installing a drain pocket, it should be of the same pipe diameter as the steam main – forming “equal T’s”, up to a size of DN100. If a smaller bore drain pipe is fitted then the velocity of the condensate will allow it to skip over the drain pipe connection. In addition, the reduced volume of the drain pipe may cause it to overflow, thereby becoming another source of water hammer.

6. Steam system materials – Particularly in legacy installations, cast iron (gg25) pipework and equipment was used as the standard material, which has been shown to offer certain weaknesses to impact (including water hammer) when compared to other affordable materials;– which could result in catastrophic failure. We recommend as a best practice, to use spherical graphite iron (SG Iron) or stainless steel (eg 316L), that can be up to 20-25 times more resistant to impact than standard cast iron.

7. Isolation valves – A crucial part of the safety of the steam installation is the isolation valve, which should be installed both sides of steam trap sets to allow maintenance to be carried out safely. More recently, industry has migrated to the use of double isolation valves either side of the various pieces of equipment to account for possible leakage past one of the valves and to ensure the absolute safety of maintenance engineers.

8. Pressure gauges – These are crucial for providing information required to understand the conditions inside the steam system and they should be installed before and after a control valve to ensure that the valve is performing as required. In addition, fitting them periodically throughout the steam system will give early indications of process change. This is crucial as variations in pressure, and hence temperature, can lead to reduced plant productivity and product quality.

9. Energy efficiency – Producing steam requires large amounts of energy so reducing losses wherever possible helps to improve the overall efficiency and reduce the operating costs of the system. In poor examples up to 40 percent of the energy used to produce the steam is lost, with failed steam traps accounting for 18 percent of these losses. Regular testing and maintenance is crucial to ensure that the steam traps function correctly. Further losses can come from the pipework itself and this should be lagged properly, including pipe flanges and all unused pipe-sections need to be isolated and lagged or better still removed.

10. Above all else – RESPECT steam. As an odourless, invisible, high temperature gas, steam can be extremely dangerous and as such should be treated with great respect.

As part of its product offering, Bürkert has developed a range of process control valves which can be equipped with the ELEMENT control head as part of an intelligent, decentralised control system. In addition, the experts at Bürkert can offer specific advice on selecting the correct components for most steam process designs.

Bürkert has also produced a steam site guide with further information on the design of steam systems, comprising 21 pages of very useful information, including practical examples of various calculations and can be found here or by visiting the Bürkert website, www.burkert.co.uk

For free copies of Bürkert’s Steam Site Guide, and for information on Bürkert’s regular free Steam Training Courses, please contact Kirsty Anderson, Bürkert UK Marketing Manager: Tel: 01453 731353 or Email: kirsty.anderson@burkert.com

Contact Details About Us Latest News Latest Videos

Burkert Fluid Control Systems

01285648720
sales.uk@burkert.com
http://www.burkert.com/
Fluid Control Centre 1 Bridge End Gloucestershire Cirencester GL7 1QY GB

About us

Bürkert is present in thirtyfive countries around the world. We also work with a large network of distributors and partners, which means we are as close as possible to our customers. This global presence ensures full service and support to all of our customers in every country around the world. Research is the lifeblood of our company.

At Bürkert, we are never satisfied with the status quo and are continually seeking new technologies and solutions for our customers. Every year, our people develop new and highly advanced products and solutions, ranging from integrated process measurement and control units to the most sophisticated systems used in pharmaceutical research. To be a market leader, we are also an R&D leader.

Therefore, our investment in research & development is one of the highest in our industry. In our research centres in Germany and France, 150 people are committed to working for a common future for our company and our customers. We are committed to offering our expertise wherever it is needed, anywhere in the world. This global presence ensures that our advances in fluid control technology are also global.

What we do in a nutshell

Manufacture of process equipment. One of the few manufacturers to provide solutions for the complete control loop.

Where we supply to

UK Ireland, Europe

Industries we supply to

Food and Beverage, Pharmaceutical Cosmetics Toiletries, Water and Wastewater

Full steam ahead: why training is vital to optimise steam applications

Often misunderstood, steam powers a wide range of modern industrial processes, from precision industrial-scale cooking through to electronics manufacturing. Getting...
Chlorine filtration in dialysis: how advanced sensing is raising the bar

In 2022, more than 30,000 people in the UK were undergoing kidney dialysis. For every one of those patients, water...
Fast and precise chlorine detection protects Veolia’s RO membranes one year after commissioning

Rapid and accurate chlorine detection is critical to protecting reverse osmosis RO systems from long-term damage. While reagent-based chlorine measurement...
Stop the Steam: Bürkert Flow Control System Reduces Energy Costs at Aerospace Plant

At a specialist aerospace equipment manufacturer in Portsmouth, a targeted initiative to reduce energy costs identified steam consumption as a...
Valve Diagnostics: New Insights for Medical and Laboratory Applications

For many medical and laboratory uses, however, verification of liquid flow is paramount, and incorporating sensors or electronics to validate...
ICB Distillers cuts production costs with contact-free flow meter

ICB Distillers has made an important move to decrease the cost of production while keeping high hygiene standards and product...