High Volume Sewage Transfer Pumps for Sewage Lifting Station
Fluids Handling

High Volume Sewage Transfer Pumps for Sewage Lifting Station

Photo of North Ridge Pumps North Ridge Pumps Follow on X Send an email 02/12/2025
224 4 minutes read
Listen to this article

A leading overseas construction firm had a particularly challenging operation: safely and efficiently moving large volumes of sewage and sludge-laden water, with a density of approximately 1,400 kg/m³, for a luxury new-build development. The solution took the shape of a sewage lift station fitted with four high-volume pumps installed inside a dry well and fed from an adjacent storage tank.

This was not a remote industrial installation; it was a 165,000 m² multi-million-pound development comprising 3,000 high-end apartments. These pumps were not just shifting sewage, but underpinning the wastewater infrastructure of a major residential landmark where reliability was non-negotiable. Delivering on that requirement was a challenge we were proud to fulfil.

What is a sewage water lifting station?

Also called a lift station or sewage pumping station, a sewage lifting station is a facility engineered to transfer wastewater uphill when gravity alone is insufficient. It collects sewage in an underground wet well and, once the liquid reaches a pre-set level, it automatically starts pumps that raise the wastewater through pipes to a higher point in the network-en route usually to a treatment plant.

How it works:

Collection – Wastewater from homes, businesses or industrial sources flows into an underground wet well.

Monitoring – Sensors continually track the liquid level. These could be float switches with magnetic contacts, ultrasonic probes or other level-control devices.

Pumping – When the level is reached, pumps automatically switch on, and this reduces the chamber's content.
Discharge: Pumps force the wastewater through pressurized pipes to a higher elevation or another segment of the network.

Gravity flow – From that high point gravity continues to keep the flow moving on, usually to a wastewater treatment plant.

In essence, a lift station acts like a relay, pushing sewage forward where gravity alone cannot, and sustaining smooth system flow in an efficient and reliable manner.

high volume sewage transfer pump

Importance of correct pump selection and method of installation

The first step in sewage or wastewater pump design involves the selection of a pump type and installation configuration. Pumps may be: submerged in a pit, surface-mounted and primed from a tank, or flooded below or beside a tank. Each has its trade-offs.

Surface-mounted pumps need to be self-priming-either inherently, as can be the case with progressing-cavity, peristaltic, or AODD pumps-or by specifying centrifugal models that have priming at the design stage. Their submerged equivalents may be initially cheaper but often require crane removal for maintenance if motors sit outside the fluid.

Spatial limitations also drive the selection: where space is at a premium, as in underground car park pump chambers, submerged pumps may be the only practical solution. In other situations, vertical inline or long-coupled pumps can provide easier in-situ maintenance by locating motors above the liquid.

Incorporating protective measures such as liquid detectors and submersible pumps of small rating provides additional security against flooding and system failure. These compromises are important design factors as specified in the UK's wastewater design guidance.

Control systems and automation

A well-designed lift station must include robust control systems. Pumps can operate automatically via float switches, level probes or ultrasonic sensors, or manually for intermittent use. Submersible pumps often have integral float switches, while other pump designs can be integrated with a control panel to provide fully automated operation.

Control systems can control start/stop logic, prevent dry running, signal operators in case of blockages, and regulate flow and pressure using sensors installed in the discharge piping. When properly configured, the controls can ensure safe, effective wastewater chamber drainage every time, minimizing operational risks while reducing maintenance overhead.

Our solution: Specification for a large-scale apartment project

For this development, we chose four XVIL high-flow vertical inline centrifugal pumps selected for their robustness and ease of maintenance. Each pump includes a spacer coupling, dual bearings to absorb the radial forces, and independent shafts so that, if necessary, only the pump shaft needs to be replaced.

Each unit handles 180 L/s, 650 m³/h, providing a total capacity of 720 L/s, 2,600 m³/h of sewage. Fitted with 10″, 250 mm ports, the pumps featured AISI-316 stainless steel impellers and 132 kW motors to provide pressures of 3–4 bar. Three non-invasive electromagnetic flowmeters were installed with the pumps, offering 99% accuracy over the flow range. A 162 kW control panel with five multi-contact float switches provided automatic operation based on sewage levels.

This setup, installed on a concrete plinth, provides for proper alignment, reduces pipe stress, keeps intakes clear, and considerably simplifies maintenance. In turn, this delivers reliable long-term performance under the heavy and demanding loads expected in a large residential estate.

Why this matters for developers in the UK market

Whether one is building a large housing estate, a mixed-use development, or a high-density residential complex, specifying the right sewage transfer pumps with an appropriate control strategy is crucial for long-term reliability, compliance, and ease of maintenance. In many installations throughout the UK, single or duplex package pumping stations meet relevant standards such as EN 12050-1 for wastewater lifting plants.

By choosing high-capacity, serviceable vertical inline pumps with accurate automated control, you minimize downtime, as well as avoid logistic problems associated with the renewal of submerged motors. You also have safer maintenance procedures and reduced risk of flooding, while meeting the UK's wastewater infrastructure standards.

Be it high-volume sewage transfer or just basic but robust pumping of wastewater, your project deserves the best – contact North Ridge Pumps to discuss how we can help you specify a reliable and low-maintenance solution for your requirements.

North Ridge Pumps
Premium Package

North Ridge Pumps

north-ridge-pumps-about

About us

North Ridge Pumps are an independent manufacturer and distributor of pumps. Having been established since 1998, we have a vast array of experience having become accustomed to supplying pumps for most processes.

We work within a range of industries both UK and Internationally, specifying pumps for a wide variety of applications from the transfer of corrosive and aggressive chemicals, to dewatered sludge, viscous grease, resin, glues, food and Seawater.

Our pumps range from standard centrifugal and multistage pumps, to immersed and process overhung solid handling pumps. We also supply a wide range of positive displacement pumps including Vane, Piston, Progressing Cavity and Peristaltic enabling us to specify more than one solution for your application, but also ensuring the majority of applications remain within our reach.

We offer the following services:

Technical support – We know at times pump selection is difficult. Pump selections are made with confidence by technical sales engineers who understand your process, ensuring equipment is engineered beyond your needs.

To select the correct technical solution for your requirement, longevity of design is prioritised. If there are existing issues you need assistance with, we work with you to solve these which could be high maintenance costs, frequent service periods, repeated equipment breakdown leading to lost revenue, inconsistent flow rates, clogging or where pumped product is inconsistent.

Application experience – Due to our 20 years of application experience we work with you to ensure our pumps operate according to your desired application. Our experience means we have most likely provided a solution for a similar process previously. With proven results, we know how to achieve your outcome sooner.

As our pumps are completely configurable, we design pumps with materials according to your requirement, and to your required duty point. Pumps are engineered specifically for your process whether they be baseplate mounted, within a mobile frame or in kit form with couplings, hoses, and dispensing nozzle.

Industry knowledge – We have a thorough understanding of a range of industries through experience from supplying the offshore oil and gas market, to paper mills, chemical plants and food manufacturers to name a few.

We not only understand the importance of downtime but also what each process requires and how small design improvements specific to the nature of your industry and application can reduce downtime, facilitate maintenance and improve longevity.

If you have a process or application you require a pump for, or a process which requires improving, get in touch to see how we can help.

What we do in a nutshell

Pump Specification & Supply

Photo of North Ridge Pumps North Ridge Pumps Follow on X Send an email 02/12/2025
224 4 minutes read
Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Back to top button
    PII logo

    Read our latest issue here

    Join 25,000 process industry specialists and subscribe to:

    • Process Industry Informer bi-monthly magazine
    • Process Industry Update weekly E-newsletter
    • And our regular Podcast and Webinars
    Yes, Sign Me Up!

    PII has a global network of suppliers ready to help...