Investing in high-quality process control valves have several operational advantages, including an extended service life. However, when just the valve actuators reach the end of their service life, the options can be limited, especially when the OEM parts are obsolete.
Fortunately for a UK based malt processer Bürkert has been able to provide a cost-effective retrofit solution for two hundred third-party valves, upgrading them with Bürkert Type 8691 control heads to keep the full complement operational for years to come.
The food and beverage industry uses process control valves extensively to manage the flow of liquids and gases throughout the manufacturing process. As such, their reliability is essential to the continued operation of the food manufacturing process: keeping sufficient spare parts available is therefore an important task.
However, as equipment ages, the original equipment manufacturer (OEM) may no longer support the product. At this point, maintenance managers can be left with just their own stock of spare parts, which will, inevitably, run out at some point.
Cost-effective solutions
In this case, the food manufacturer took the opportunity to investigate the alternatives, starting with replacing the control valves completely. With over 200 process control valves affected, replacement would be a substantial investment and the payback period would have been longer than desired.
At the same time, Bürkert, as an existing supplier to the company, was invited to offer a solution. Craig Kerr, Sales Manager at Bürkert, explains: “We were provided with a spare control valve from the production line and asked to deliver a proposal that would resolve the issue of ageing controls, while retaining the value in the valve body.”
As a major manufacturer of process control valves, Burkert could have offered a complete replacement valve, but having assessed the condition of the valve body decided that just the control head needed attention.
The obsolete pneumatic actuator could be replaced with Bürkert’s Type 8691 control head with the simple addition of an adapting bracket to attach it to the legacy valves.
The Type 8691 is ideally suited to the food and beverage industry; being constructed from stainless steel, it is easy to clean and has excellent chemical resistance properties.
Plug & Play
Craig continues: “The manufacturing process operates a decentralised control system using ASI, with the valves either open or closed. Bürkert’s suggested solution would provide a simple, plug-and-play control head that would easily attach to the control valve body.”
In all, it would take less than an hour to replace each control head. This includes assigning an address for the PLC and using the tuning function where the operator presses the buttons to open and close the valve. The integrated valve position sensor registers these points and stores them to ensure reliable valve operation.
The Type 8691 is ideally suited to the food and beverage industry; being constructed from stainless steel, with excellent ingress protection ratings, it is easy to clean and has excellent chemical resistance properties. In addition, it is equipped with bright, coloured LED status indicators that show the position of the valve at a glance.
Craig concludes: “The customer had the first unit on trial for a short period before ordering a further one hundred units. These were all installed and commissioned by the customer and one year on, they are all continuing to function reliably. This solution has been very cost-effective, saving thousands in process hardware and replacement costs by allowing the customer to retain the original valves and minimise any potential downtime from the upgrade.”
Burkert Fluid Control Systems
- 01285648720
- sales.uk@burkert.com
- http://www.burkert.com/
- Fluid Control Centre 1 Bridge End Gloucestershire Cirencester GL7 1QY GB
About us
Bürkert is present in thirtyfive countries around the world. We also work with a large network of distributors and partners, which means we are as close as possible to our customers. This global presence ensures full service and support to all of our customers in every country around the world. Research is the lifeblood of our company.
At Bürkert, we are never satisfied with the status quo and are continually seeking new technologies and solutions for our customers. Every year, our people develop new and highly advanced products and solutions, ranging from integrated process measurement and control units to the most sophisticated systems used in pharmaceutical research. To be a market leader, we are also an R&D leader.
Therefore, our investment in research & development is one of the highest in our industry. In our research centres in Germany and France, 150 people are committed to working for a common future for our company and our customers. We are committed to offering our expertise wherever it is needed, anywhere in the world. This global presence ensures that our advances in fluid control technology are also global.
What we do in a nutshell
Manufacture of process equipment. One of the few manufacturers to provide solutions for the complete control loop.
Where we supply to
UK Ireland, Europe
Industries we supply to
Food and Beverage, Pharmaceutical Cosmetics Toiletries, Water and Wastewater
-
Surface Acoustic Wave (SAW) Technology: Advanced Flow Measurement and Biofilm Prevention in WFI Loops
Bürkert, a leader in flow control solutions, has introduced an innovative flowmeter that employs Surface Acoustic Wave (SAW) technology. This...
-
Bürkert Launches Ultra High-pressure Valves For Hydrogen Applications
Liquid and gas flow control specialist Bürkert has launched a range of valves designed to control ultra high-pressure flow for...
-
A Question Of Reliability: Supply And Control Devices For Industrial Printers
In the world of industrial and commercial printing, the efficiency and precision of ink supply and control systems are crucial...
-
UK’s first hydrogen kiln test rig helps manufacturers make a sustainable switch
A hydrogen-fuelled kiln test rig is helping brick and ceramics manufacturers to support the energy transition. In a UK first,...
-
Bürkert’s OALAB simplifies chlorine measurement for industrial carbon filters
Common in pharmaceutical, food and beverage applications, industrial high-rate granular activated carbon (GAC) filters remove chlorine from water supplies, safeguarding...
-
Tradition benefitting from technology: Controlling the brewing process
The food and beverage industry is continually evolving, driven by the need for enhanced efficiency, quality, and safety. Central to...
-
FLOWave | Oil dosing (English)
-
Feldbus Gateway Modul ME43: How to operate FLOWave (DE)
