A Shropshire dairy farmer/AD operator remembers the day when his sorrow turned to joy over what he thought was a faulty flowmeter – only to later discover that it was the output created by a new slurry pump that had sent readings soaring to numbers previously not recorded by the site’s instrumentation.
“He didn’t believe it at first”, said Paul Davies from Landia.
Subscribe to PII and receive:
Our long-established bi-monthly digital magazine *Process Industry Informer*, featuring exclusive articles, news and updates across the Process Industries, plus commentary from our three industry experts:
Sean Moran
Gavin Smith
Dave Green
PLUS:
- Process Industry Update — our weekly e-newsletter
- PII Podcast
- Special messages from our advertising partners
“He wasn’t happy to begin with but didn’t mind admitting later that he thought it had been his flowmeter playing up”.
The reason for his welcome surprise was that a new pump from Landia had produced an unprecedented throughput. Some had told the farmer that it wouldn’t work for the very tough AD/feedstock application – and initially he agreed with them – but they were all proved wrong.
‘Maximum Output’
Davies added: “Prior to the installation, he couldn’t run at maximum output, which was very frustrating, but now all of a sudden, what was previously taking an hour to process has been reduced to just 25 minutes – enough to make any AD operator/farmer happy”.
Designed for a very specific application, directly on from the digestate feeder, the farm and its AD operation were almost immediately able to reduce the cost of its energy-rich feedstock.
Established over a century ago, the 2,000-acre farm first invested in Landia slurry pump (a submersible 7.5kW) in 2003, which is still in operation. It continuously mixes what has now become a valuable feedstock, rather than a waste that must be dealt with.
Investing in its own AD plant four years ago, the farm’s annual electricity bill was around £55,000 – but the 1.5MW of power now produced easily covers that now historic outlay, with a healthy surplus sold on to the National Grid – and excess heat put to good use for drying the farm’s bedding.
The feedstock of cow slurry, maize, rye and sugar beet is topped up with fruit and vegetable food waste from local wholesalers – which after being held in a 500m3 buffer tank, is pumped to a heat treatment tank, before it is sent to the primary digester. The resulting digestate is pumped to two storage tanks of 240m3 and 500m3 – before the final liquor is sent to the farm’s slurry lagoon.
‘Benefits the entire process’
The high pressure 22kW Landia Chopper Pumps are designed with an external knife system that stops any solids from entering the pump’s casing. Throughout the operation, the Landia pumps at the farm (which all run on variable speed drives to maximise the life of the impellers) continuously reduces particle sizes, which benefits the entire process. In total, there is now one mixer and nine pumps from Landia, including three longshaft designs and four dry-installed pumps.
Paul Davies from Landia added: “We’ve worked with the farm for a long time and wanted to help them optimise their new AD process. We were faced with several challenges, but we’ve put our heads together and were determined to achieve the required result.
“In the end, we found a way of boosting the pumps with an extra loop in the pipework. ‘Live digestate’ can cause problems for many pumps and pipework, with so much extra gas being released, but our design and the robustness of the pumps means that nothing has tripped out”.
01948 661 200
www.landia.co.uk
Landia Ltd
- 0194 8661 200
- info@landia.co.uk
- http://www.landia.co.uk
- Waymills Industrial Estate, Whitchurch, Shropshire, SY13 1TT GB
About us
Landia's headquarters are located in Lem, which is how it has been since 1933. Today, Landia has subsidiaries in England, Germany, Norway and the US, and a sales office in China. In addition, Landia products are sold in 45 countries worldwide. Landia supplies pumping and mixing solutions to many different industries, with the most important ones being agriculture, wastewater, biogas plants and the fish industry. In general, you will find Landia's products wherever there is a difficult medium to be pumped or mixed. Landia survives by selling quality solutions in close partnership with the customers.
Landia is not a supermarket where customers select products from the shelves. Our technical sales people are always in close discussions with customers, which ensures solutions that work. For Landia, quality in every phase a matter of course, and we have been ISO9001 certified since 1994. Quality also means that many of Landia's products have been in operation for 20-25 years even though the operating conditions may be extreme. In that way, Landia's customers achieve the lowest lifespan costs, while resource consumption is minimised, which further results in a positive impact on the environment.
Where we supply to
Europe, Africa, Asia, Australia, South America, North America
Industries we supply to
Chemicals
-
Landia GasMix operating in tank
-
LANDIA's EradiGator - Heavy Duty Chopper Pump Mixes & Chops To Clean Your Wet Well
-
POPL Tarm WWTP
