Optical Flow Sensors Monitor Cooling of the World’s Most Sensitive Astronomical Camera

Titan Enterprises 13/12/2019

179 2 minutes read

Listen to this article

Titan Enterprises reports on how optical flow sensor technology has solved a high-tech problem – monitoring the flow of coolant to the world's most sensitive astronomical camera.

The world’s largest optical telescope, the 10.4m Gran Telescopio Canarias (GTC) on the Canary Island of La Palma, is equipped with a powerful astronomical camera built by the University of Sheffield, UK.

This camera, called HiPERCAM, was commissioned on the telescope in 2018 and can take over 1000 pictures every second simultaneously in five optical colours.

The five light sensors used in HiPERCAM are ultra-sensitive charge-coupled devices (CCDs), which require cooling to 183K (-90degC) to minimise noise in the images.

This cooling is achieved using very high performance thermo-electric (Peltier) coolers, which in turn require a liquid coolant (a water-glycol mixture at +5degC) to remove the heat they extract.

If the flow of coolant fails, the heat input from the Peltier power supplies would destroy the CCDs, which would cost over £500,000 and take years to replace.

With so much at stake, the Sheffield team have developed a fail-safe system, where any disruption to the flow of coolant past the detector causes the power supply to the Peltiers to switch off automatically, thereby protecting their expensive equipment. Clearly, the most important element in this fail-safe system is an accurate and reliable flow sensor for the coolant.

After attempts to use turbine and ultrasonic flow sensors proved unsuccessful due to metallic film build-up on the propellers and micro bubbles in the coolant the HiPERCAM team turned to Titan Enterprises for advice.

After detailed discussions around a type of sensor that could be used that is impervious to the undesirable (but unavoidable) characteristics of the telescope’s cooling fluid – the Titan FT2 optical flow sensor that uses an LED and photodiode to measure flow was proposed.

When the rotor spins in an FT2 optical flow sensor the photodiode can detect the LED with a frequency proportional to the flow rate. When the rotor is static, the photodiode cannot see the LED, indicating no flow.

Six FT-2 optical flow sensors have recently been successfully tested in the lab at Sheffield and are now on their way to the GTC in La Palma for final commissioning on HiPERCAM to enable this powerful astronomical camera to finally achieve its full scientific potential.

For further information please visit here or contact Titan Enterprises on +44-1935-812790 / sales@flowmeters.co.uk.

Contact Details About Us Latest News Latest Videos

Titan Enterprises Limited

01935812790
sales@flowmeters.co.uk
http://www.flowmeters.co.uk
Unit 2 5a Coldharbour Business Park, Sherborne Dorset, DT9 4JW GB

About us

With over 40-years experience in flow meter innovation, Titan Enterprises Ltd are a UK-based manufacturer of high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flow meters and the low flow Turbine flow meters and instrument range.

Our knowledgeable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application whether it is a low cost OEM solution or a specialist flowmeter in exotic materials. Titan supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical, offshire oil & gas industry, power, chemicals and mining.

For higher volume users we can custom design a flowmeter to match exact application requirements and thus not compromise achievable results with a less than ideal sensor.

At Titan we endeavour to produce devices that are inherently reliable as well as manufactured using the latest and most economical production technology. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.

We produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.

What we do in a nutshell

Titan Enterprises is a leading UK manufacturer and international supplier of high-performance liquid flow measurement solutions. We specialise in the design and production of small-bore, affordable off-the-shelf flow meters to bespoke flow sensors designed to customer specifications meeting specific flow ranges and environmental conditions.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Something interesting you may not know about us:

Titan's R&D spend is 20% of our turnover where the industry norm is 8-10%.

Precision and protection: Titan’s 800 Series flowmeters power peracetic acid dispensing systems

In modern medical pharmaceutical and hygiene applications, peracetic acid, commonly known as PAA, has become one of the most trusted...
Titan Enterprises Scoops “Highly Commended” Accolade for Manufacturer of the Year at Annual Awards

Titan Enterprises, a leading UK-based flowmeter manufacturer in Dorset, is proud to announce it has been Highly Commended in the...
Titan Enterprises Beverage Flow Meters: Turbine vs Ultrasonic – Which is Best for Your Application?

Selecting the right flow measurement technology is essential for reliable drinks dispensing, beverage production, and wider food and drink processing...
Titan Enterprises Develops Custom Calibration Rigs to Push New Frontiers in Ultrasonic Ultra-Low Flow Measurement

Titan Enterprises has issued a technical paper outlining the research and resolution of calibration issues that were encountered during the...
Optimising Hydraulic Performance: Precision Flow Measurement Challenges

Titan Enterprises shares practical insights to help engineers and operators address the challenges of precision flow metering, ensuring accurate measurements...
Why Total Cost of Ownership (TCO) Is Greater Than Purchase Price in Flow Measurement Systems

Titan Enterprises stresses the intangible cost benefits of low-maintenance, long-life flow meter technology where performance is balanced with long-term value.When...