← Back to Pumps category

Pumps for dairy products processing

AXF 294 Fig.1 PE WCB Universal Series

AxFlow Product Manager Malcolm Walker looks at the types of positive displacement pumps that are making their mark in the dairy products industry

Across the broad spectrum of fluids handling in the processing industries one element that is common to all is the requirement for positive displacement pumps that can move delicate or sensitive media without causing damage to or physically altering the structure of the media.

The food and beverage manufacturing industry is considered to have the biggest requirement for such pumps as many applications require a gentle pumping action. Typical applications include fluids that contain solids, display either high or low levels of viscosity, have high or low temperature levels, are non-lubricating or could be made from ingredients that can be aggressive and cause damage to the pump.

Within food processing the pump technologies that have a very high profile are rotary piston, rotary lobe, twin-screw, air-operated double diaphragm pumps. Clearly, there is no shortage of pump types from which to choose, which makes matching the pump to the application as the prime consideration.

Hygiene requirements

Although there is still no legal obligation on food manufacturers to use hygienically certified fluid handling equipment, the ever increasing costs both financially and potential harm to a brand’s reputation resulting from hygienically defective products, has meant that never before has there been so much pressure on food manufacturers to utilise the correct hygienic process equipment in the sight of the law.

There are two basic groups of approval, those that apply to material compatibility and those to the actual design of the pump. Taking those concerning material compatibility, there are several globally recognised approval bodies the oldest being the US Food and Drug Administration (FDA) and which is still seen worldwide as the basic benchmark for material compatibility.

However, the new kid on block in the guise of EC 1935/2004 has by and large superseded FDA. The reason for this being that EC 1935/2004 has wider and stricter criteria. For instance, it requires that compounds must be examined to more specific tests than FDA and requires traceability, whereas FDA does not necessarily do this. The implication of this is that not all FDA materials will meet EC1935/2004 requirements.

The most widely-used employed pump types that can accommodate applications in the dairy products sector are the rotary lobe pump and external circumference piston (ECP) pump because their large rotor cavities can handle the solids and particles that can be present in the fluid being pumped.

There is very little difference between a rotary lobe and an ECP pump as they both essentially use the same operating principle. This involves interlocking lobe shaped rotors which move a fixed volume around the pump chamber pushing the liquid out of the discharge as the rotors mesh together.

AXF 348 Fig 2U 3pic3

The Waukesha Universal series of rotary lobe and ECP pumps has proved to be successful across the globe. The WCB Universal 1 and Universal 2 (Fig.1) pumps deliver many of the sector’s fluid handling requirements over many years and only quite recently the series has been extended with the introduction of the Universal 3 (Fig.2).

This new pump complements the Universal 1 and Universal 2, but the difference lies in its focus on hygienic applications in food processing to meet the most stringent international standards. The main features are the complete SIP/CIP capabilities and double O-ring seals, which are not available in the Universal 2 and Universal 1 Series.

Case studies

For one international producer of ice cream mix, problems were being experienced with premature failure of rotors and shaft parts in pumps in its ice cream mixing system. The pumps used in this system were being replaced every six months so it was also looking to reduce the cost of ownership. The problem was solved by installing a new mixing system fitted with WCB Universal 1 ECP pumps.

The rotors have large crossover clearances and higher levels of efficiency and were able to stand up to the plant’s demanding performance requirements and eliminate pump downtime. As an added benefit the simple ‘O’ring shaft seals mad an alternative to the more expensive and sensitive mechanical seals supplied with the original pumps.

In another dairy plant producing white mass for Greek yoghurt, the producer was experiencing multiple issues with its existing lobe pumps, in particulate excessive shearing when pumping the mix and high maintenance costs resulting from pump break-downs.

Over several years of careful testing the producer evaluated several brands of pumps to determine which type imparted the least amount of damage to the white mass, provided the best cleanability and the lowest costs of ownership.

At the end of the trials the WCB Universal 2 pumps with single mechanical seals were selected for the application. The unique features of the ECP rotors provide a long slip path and gently scoop the solid particulates in the product, thus preventing slippage back through the tight clearances of the pump and minimising shear. Using the WCB pumps have proved to be durable and maintain the integrity of the producer’s product.

Twin Screw pump

Food and drink processors can now take advantage of the new Waukesha Universal TS ‘twin-screw’ rotary positive displacement pump to its portfolio.
AXF348 Fig.3 UTS Angle - Copy
A further recent addition to the WCB Universal Series is the Universal TS pump for food and beverage processing (Fig.3). This pump exploits the benefits of Waukesha Alloy 88 non-galling material twin screws to pump various media containing large particulates, thereby lowering damage to the pump and reducing maintenance.

Users also benefit from the pump’s high suction capability and wide range of operating speeds which means that only one pump is required to transfer product and undertake CIP. This removes the number of pumps, valves and control instrumentation, thus contributing to reduced costs and simpler, more compact systems.

As a result of the twin screws’ rotating geometry, a pulse-free flow is created making the pump suitable for many applications such as feeding homogenisers.

Significantly, the meshing screws have identical rear and front profiles giving bi-directional flows which enable easy media transfer between vessels without alteration to the pump set-up. Front loaded access to product side seals makes for easy maintenance and reduced downtime.

For further product details contact Malcolm Walker, AxFlow Ltd, on
Tel: 01753 255 600
www.axflow.co.uk

AxFlow Ltd

Knowledge, solutions and services for reliable fluid handling in your industry.

Signature: Gold membership

Related news

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.