The latest issue off PII is out now!

Read here!
Qdos Pump Doses For Three Years Without Fault
Qdos P60 pumphead in situ at the City of Oak Ridge water treatment plant
News & Events

Qdos Pump Doses For Three Years Without Fault

Photo of Watson Marlow Watson Marlow Send an email 07/06/2023
360 3 minutes read
Story Highlights
  • Peristaltic pumphead runs for three years without maintenance downtime.
  • Risk of polymer leaks at US water treatment plant eliminated
  • Successful trial leads to dosing pump orders for new water treatment plant
Listen to this article

A Qdos 60 PU peristaltic pumphead from Watson Marlow Fluid Technology Solutions has completed three years of maintenance-free operation without any leaks in a trial at the City of Oak Ridge water treatment plant (WTP) in Tennessee, US. 

The trial began in May 2020 with the prototype Qdos 60 peristaltic pump with ReNu PU (polyurethane) pumphead dosing polyaluminium chloride, a polymer used in water purification which enhances flocculation and coagulation of pollutants.

Throughout the period, there has been no need to stop production for maintenance downtime or to fix a polymer leak – which are expensive and time-consuming to clean up.   

The Qdos 60 ReNu PU pumphead is specifically designed for polymer dosing, and has performed without requiring replacement, providing efficient, safe, leak-free and reliable polymer metering. 

“The Qdos 60 pump that is used to feed coagulant – a polyaluminium chloride polymer called DYPAC 5461 – and the prototype pumphead that Watson-Marlow provided has been absolutely amazing,” said, plant manager Mark Terry. “The pumps that were previously used to add coagulant into the plant’s raw water were old and prone to clogging. It was decided to use a Qdos 60 PU pump and there has been no disappointment with the performance. 

“The Qdos 60 and ReNu PU pumphead was installed and began feeding the coagulant on May 14, 2020. Other than when the plant has been down for a few hours for reasons such as temporary power outages, the Qdos 60 pump and the prototype pumphead has run non-stop for three years.  

“Another Qdos 60 pump was purchased to act as a back-up but is has not been needed,” Terry said. 

The Qdos 60 PU offers precise and repeatable flows for many hard-to-handle fluids, including viscous fluids and aliphatic hydrocarbons, at linear flow rates of up to 60 L/h (15.8 GPH) and pressures of up to 5 bar (73 psi). The ReNu pumphead is a single, safely contained, component for rapid no-tools maintenance with no additional valves or ancillary equipment to fail or vapour lock. 

“The obvious benefits that the Qdos pump has provided to the water treatment plant is no polymer leaks since it was put into service,” said Terry. “Aside from occasional calibrations, the pump has maintained a very consistent and accurate feed rate of the coagulant that is added to the raw water.

“Low maintenance and non-stop running of the Qdos pump at the plant is vitally important because, aside from a few unplanned episodes, it runs 24 hours a day, seven-days-a-week. Based upon these realities the Qdos pump has been a great choice.” 

The benefits of the Qdos 60 PU include: 

  • Excellent compatibility for complex polymers including polyacrylamide (PAM) and other flocculants and coagulants used in wastewater treatment 
  • The contained pumphead design with integral leak detection reduces wastage and eliminates operator exposure to chemicals 
  • Precision dosing of ±1%, even under varying conditions, minimises chemical expenditure 
  • Low-shear, gentle peristaltic pumping protects polymer chains and consistency, maintaining product integrity 

The city of Oak Ridge water treatment plant is using seven Qdos peristaltic pumps – both the 30 and 60 models – to feed chemicals such as 20% sodium permanganate, 12.5% sodium hypochlorite, fluorosilicic acid, and a poly/orthophosphate corrosion inhibitor to the plant’s current coagulant. 

“The Qdos 30 pump that is used to feed fluorosilicic acid at the water treatment plant has performed admirably considering the pressure it works against and because of the corrosive nature of the chemical, like the hypochlorite feeding Qdos 60 pumps,” Terry said.   

The Oak Ridge WTP is decommissioning the existing 1943 plant that provides the city’s drinking water and constructing a new facility to treat over 45 million litres (12 million gallons) of water per day and provide water to 31,000 residents.  

The new plant will be ready to provide water by spring 2025 and will be using ten Qdos 60 pumps for a variety of chemicals for water treatment such as hydrogen peroxide, sodium permanganate, and fluoride. In addition, WMFTS will also be providing two Bredel Apex 15 pumps for sodium hypochlorite. 

Chris Miller, district sales manager at WMFTS, said, “Oak Ridge was having problems with its older diaphragm pumps, so a trial was suggested of the Qdos 60 PU. It has been one of Watson Marlow’s great success stories and in working with Mark Terry and the City of Oak Ridge, we are excited to see that Qdos will be the chemical feed pump of choice for the new water plant.” 

Watson Marlow Fluid Technology Solutions 

www.wmfts.com

Watson Marlow
Premium Package

Watson-Marlow Fluid Technology Solutions

About us

Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.

We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.

The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:

Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

  • Flexicon PF7 tabletop peristaltic liquid filling machine

  • Sterile ReNu SU Technology cartridge

  • Quantum and ReNu SU Technology cartridge - Make sterile connections in non-sterile environments

Photo of Watson Marlow Watson Marlow Send an email 07/06/2023
360 3 minutes read
Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Back to top button
    PII logo

    Read our latest issue here

    Join 25,000 process industry specialists and subscribe to:

    • Process Industry Informer bi-monthly magazine
    • Process Industry Update weekly E-newsletter
    • And our regular Podcast and Webinars
    Click to Learn More...

    PII has a global network of suppliers ready to help...