Key points
Corscience, a manufacturer of CO2 analysers for clinical use has selected a micro pump for its reliability in flow control. Schwarzer Precision by Bürkert has supplied Corscience with a miniature eccentric diaphragm pump for its capnometer modules. Fast customisation as well as compact size and quiet operationwere also key requirements for the medical device.
Capnometry is a method for monitoring (various) respiratory gas parameters of patients and its introduction has led to a significant reduction of complications in those who are on ventilators. A capnometer measures the CO2 content of exhaled breath to present data to clinicians to ensure patient health and help prevent life-threatening situations. As a result, capnometers are vital medical devices in anaesthesiology, intensive care units and for emergency services.
Capnometry essentials
Capnometry devices can monitor CO2 with a mainstream method where the patient’s breathing creates the flow, or by a side-stream method, used, for example, when a patient is under anaesthetic. With a tube connected to the breathing circuit (e.g. endotracheal tube or nasal cannulae), a diaphragm pump draws the breath down the tube and through an infrared sensor that continuously measures the CO2 content.
To establish accurate measurement results for patient safety, it’s vital that the flow is continuous and achieves the required flow rate. For this reason, reliability was the most important factor in pump specification for Corscience, which develops capnometry devices (CAP201). Corscience turned to Schwarzer Precision to provide the miniature vacuum pump based on the company’s reliable design and manufacturing, as well as its rapid customisation ability.
“One of the most important things is pump reliability,” says Nils Kerlin, Product Manager, Schwarzer Precision. “Frequently, the patient is in a critical condition where monitoring is crucial, therefore it’s vital that the capnometer is able to provide continuous, accurate measurement.”
Quiet reliability
Schwarzer Precision specified its SP 100 EC miniature eccentric diaphragm pump with EPDM elastomers and long-life bearings. Required to draw a continuous flow of 80 ml per minute, this rate also remains stable. Installed in a patient environment, it’s also important that the pump should allow quiet, low-noise operation with low vibration. It was also crucial that the pump occupied a small footprint within the capnometer’s compact board, which it achieved thanks to its micro dimensions.
To fulfil Corscience’s precise specification, Schwarzer Precision’s customisation capability was essential, and every aspect of the pump can be adapted to suit the specification. For Corscience, the pump was equipped with special elastomers to enable safe operation at higher temperatures in emergency operations.
The elastomers were selected for their reliability, with various types of hardness and shape available. For the motor, a premium brushed DC motor was specified for its long lifetime. This level of customisation to create a sample is provided to the customer within a week and following customer testing.
“Customisation is often based on a balancing of the customer’s requirements, be that flow rate, noise level, power consumption, or other factors,” says Nils. “A real differentiator for Schwarzer is our ability to customise every aspect of the pump and provide a customer sample, ready for their lab and field tests, within just days.”
Simple customisation
Corscience also supplies its CAP201 capnometer board for integration in wider medical devices. One use is for battery-powered mobile emergency devices that demand high energy efficiency.
“Set-up of the pump is critical in order to minimise energy consumption,” says Nils. “It requires design expertise to reach the optimum level, often by adjusting the stroke of the pump and the elastomer design, balanced with aspects such as flow rate. It’s our customisation capability that ensures we can achieve the right pump attributes for the customer’s application.”
While the SP 100 EC series pump served as the basis for this capnometer, the slightly larger SP 270 EC eccentric diaphragm pump could also be used for this application. Schwarzer also supplies pumps such as rotary, miniature vane and linear diaphragm, as well as pumps for liquid applications. Schwarzer Precision’s range of micro pumps are offered alongside Bürkert’s fluid and gas control systems, which can be specified by Bürkert’s UK team.
Kirsty Anderson
Bürkert Fluid Control Systems
Tel: +44 (0)1285 648761 Fax: +44 (0)1285 648721
Web: www.burkert.co.uk
Email: kirsty.anderson@burkert.com
Burkert Fluid Control Systems
- 01285648720
- sales.uk@burkert.com
- http://www.burkert.com/
- Fluid Control Centre 1 Bridge End Gloucestershire Cirencester GL7 1QY GB
About us
Bürkert is present in thirtyfive countries around the world. We also work with a large network of distributors and partners, which means we are as close as possible to our customers. This global presence ensures full service and support to all of our customers in every country around the world. Research is the lifeblood of our company.
At Bürkert, we are never satisfied with the status quo and are continually seeking new technologies and solutions for our customers. Every year, our people develop new and highly advanced products and solutions, ranging from integrated process measurement and control units to the most sophisticated systems used in pharmaceutical research. To be a market leader, we are also an R&D leader.
Therefore, our investment in research & development is one of the highest in our industry. In our research centres in Germany and France, 150 people are committed to working for a common future for our company and our customers. We are committed to offering our expertise wherever it is needed, anywhere in the world. This global presence ensures that our advances in fluid control technology are also global.
What we do in a nutshell
Manufacture of process equipment. One of the few manufacturers to provide solutions for the complete control loop.
Where we supply to
UK Ireland, Europe
Industries we supply to
Food and Beverage, Pharmaceutical Cosmetics Toiletries, Water and Wastewater
-
Surface Acoustic Wave (SAW) Technology: Advanced Flow Measurement and Biofilm Prevention in WFI Loops
Bürkert, a leader in flow control solutions, has introduced an innovative flowmeter that employs Surface Acoustic Wave (SAW) technology. This...
-
Bürkert Launches Ultra High-pressure Valves For Hydrogen Applications
Liquid and gas flow control specialist Bürkert has launched a range of valves designed to control ultra high-pressure flow for...
-
A Question Of Reliability: Supply And Control Devices For Industrial Printers
In the world of industrial and commercial printing, the efficiency and precision of ink supply and control systems are crucial...
-
UK’s first hydrogen kiln test rig helps manufacturers make a sustainable switch
A hydrogen-fuelled kiln test rig is helping brick and ceramics manufacturers to support the energy transition. In a UK first,...
-
Bürkert’s OALAB simplifies chlorine measurement for industrial carbon filters
Common in pharmaceutical, food and beverage applications, industrial high-rate granular activated carbon (GAC) filters remove chlorine from water supplies, safeguarding...
-
Tradition benefitting from technology: Controlling the brewing process
The food and beverage industry is continually evolving, driven by the need for enhanced efficiency, quality, and safety. Central to...
-
FLOWave | Oil dosing (English)
-
Feldbus Gateway Modul ME43: How to operate FLOWave (DE)
