Pressure relief valves
Brownell Ltd pressure relief valves have introduced a large range of sizes to prevent damaging pressure differentials in a wide range of industrial applications.
Flow rate requirements from just 0.1 litre/min up to10,000 litres/min depending on the applications and maximum allowable differential pressures.
Subscribe to PII and receive:
Our long-established bi-monthly digital magazine *Process Industry Informer*, featuring exclusive articles, news and updates across the Process Industries, plus commentary from our three industry experts:
Sean Moran
Gavin Smith
Dave Green
PLUS:
- Process Industry Update — our weekly e-newsletter
- PII Podcast
- Special messages from our advertising partners
In the event of increasing pressure due to system malfunction or environmental heating (or cooling). The relief valves will open at the set point and relieve the pressure of air or gas until a safe working level is achieved. The relief valves automatically reset when the closing is reached and continues to maintain a safer working level.
The use of relief valves allows designers to construct enclosures and instruments in light weight materials using the relief valves to maintain safe working pressures.
Relief valves can be used on cargo containers being transported by air. They can be set to prevent an in flight hazard in the event of pressurisation failure or system malfunction.
Most Pressure Relief Valves are factory set, some may set on installation.
For further information please contact;
Brownell Limited
Unit 2, Abbey Road Industrial Park
Commercial Way
Park Royal
London
NW10 7XF
Tel: 020 8965 9281
Fax: 020 8965 3239
www.brownell.co.uk
E-mail: marketing@brownell.co.uk
