BIA Kunststoff- und Galvanotechnik, a leading manufacturer of plastic components with metallic surfaces for the automotive industry, is using Qdos pumps from Watson-Marlow Pumps Group to dose process-critical additives into its electroplating machines. Replacing diaphragm pump technology, Qdos was selected for its precision, reliability and low maintenance costs.
Car manufacturers are increasingly demanding metal-plated plastic surfaces. Chrome surfaces for both interiors and exteriors increases prestige considerably, particularly in mid-range and luxury cars. As a result, these chrome-plated controls and trims must meet the highest technical and aesthetic requirements.
At the headquarters of BIA in Solingen near Düsseldorf, this 950-employee company operates a total of four electroplating machines that help produce more than 450,000 metal-plated plastic parts every day.
Critical dosing
“Our core competence is electroplating, and we have designed our own state-of-the-art electroplating machines,” says Alexander Zabel, Maintenance Manager at BIA.
Each of the company’s four electroplating machines has a dosing station, which is where several dosing pumps introduce important additives into the electroplating baths, such as brighteners, wetting agents and accelerators.
“In modern electroplating machines, the question of when, where and in what form additives are dosed plays a crucial role in the quality of the end product,” explains Mr Zabel. “This means that the dosing station is a vital part of the electroplating process.”
The highest level of precision is required to ensure the correct concentration of additives in the electroplating baths, and ultimately the quality of the coating on the plastic parts. In addition, BIA places the utmost importance on gentle transportation with as little pulsation as possible. Failure to achieve this could mean that the transported additives become “shattered” with the result that they cannot deliver the desired effect in the electrolyte.
Diaphragm pumps reach their limit
Until recently, diaphragm pumps were used as standard in the dosing stations at BIA, but they were proving problematic.
“The diaphragm pumps simply failed to provide the essential level of precision we require when transporting additives,” says Christian Fanenbruck who, as master electroplater, is responsible for two of the four electroplating machines at BIA. “We frequently had to carry out volumetric measurements to ensure precision.”
However, a more serious issue was the frequent, time-consuming and costly maintenance incurred by the diaphragm pumps.
“We sometimes dose highly concentrated acids and these frequently damaged the pump components that were transporting the media, so the parts had to be replaced,” continues Mr Fanenbruck. “What’s more, the diaphragm dosing pumps produced a flow with a high level of pulsation. This had a negative impact on the quality of the substances being transported. Surfactants are a particular example of where it’s important to pump at a steady rate to avoid damaging their structures.”
Qdos from Watson-Marlow
According to Mr Zabel, the company had been looking for alternatives to diaphragm pumps for a long time, and “struck gold” when it found Watson-Marlow.
“In May 2013 we decided to test the new Qdos dosing pump,” he says. “We were impressed with the results right from the start. Firstly, Qdos provides 100% precision. Typically we transport volumes of 100 ml/min; and when we set the Qdos to 100 ml it transported precisely that amount, even along a route that was more than 50 metres long in places. This makes the frequent need to carry out volumetric measurements a thing of the past.”
In contrast to diaphragm pumps, the Qdos pump also works without any accessories, such as seals or check valves, making installation easier.
Practically no maintenance
The main advantage of the Qdos pump from Watson-Marlow is the long maintenance intervals, short downtimes and low maintenance costs. The only wearing part in the whole pump is the patented ReNu pump head, which can be replaced as a complete part within a few minutes and does not require tools or any special training.
“We still haven’t been able to see how easy it is to replace the pumphead because we simply haven’t needed to yet,” says Mr Zabel. “We installed the first Qdos pumps in May 2013 and they haven’t caused us any problems since, even though they’re in constant use six days a week.”
Qdos pumps from Watson-Marlow have now been installed in two of the four electroplating machines at BIA – making a current total of 12 pumps. However, more are certain to follow.
“We will gradually replace all our diaphragm pumps with Qdos dosing pumps from Watson-Marlow,” concludes Mr Zabel. “Put simply, the Qdos pumps installed in our plant have been extremely reliable and have required practically no maintenance so far. And that’s exactly what we want; after all, who likes maintenance?”
Watson-Marlow Fluid Technology Solutions
- 01326370370
- info@wmftg.co.uk
- https://www.wmfts.com/
- Bicklandwater Road, Falmouth Business Park, Falmouth, Cornwall, TR11 4RU GB
About us
Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.
We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.
The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:
Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.
Where we supply to
Europe, Africa, Asia, Australia, South America, North America
Industries we supply to
Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater
-
Watson-Marlow to showcase Bredel CIP pump and next-generation fluid handling at PPMA 2025
Watson-Marlow Fluid Technology Solutions (WMFTS) will unveil the latest Bredel CIP pump and its portfolio of next-generation fluid management technologies...
-
Watson-Marlow launches new Bredel CIP pump for beverage producers at drinktec
Watson-Marlow Fluid Technology Solutions (WMFTS) is launching its latest innovation for the brew and beverage market; the Bredel CIP pump,...
-
Bredel Hose Pump Solves Ash Slurry Problem at Biomass Plant
A Bredel 100 hose pump with an NR Transfer hose has been installed at a biomass power station in Pécs,...
-
Watson-Marlow Fluid Technology Solutions introduces WMArchitect Interchangeable Parts for robust single-use assemblies
Watson-Marlow Fluid Technology Solutions (WMFTS) has introduced WMArchitect Interchangeable Parts to improve the longevity of single-use assemblies. The introduction brings...
-
Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut
Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut Watson-Marlow Fluid Technology Solutions (WMFTS) will...
-
German Waste-to-Energy Plant Prolongs Hose Life Using Bredel NR Transfer Hoses
Abfallverbrennungs- und Biokompost GmbH (AVBKG), the German waste processing plant, has achieved significant hose maintenance and hose life savings. Based...
-
Flexicon PF7 tabletop peristaltic liquid filling machine
-
Sterile ReNu SU Technology cartridge
-
Quantum and ReNu SU Technology cartridge - Make sterile connections in non-sterile environments
