Sharpen your distillation expertise with Henry Kister

12–14 October in London
Fluids Handling

Soft Start Range Extended to Centrifugal Pumps

Listen to this article

Carlo Gavazzi has recently launched a new range of RSWT 75mm soft starters for centrifugal pumps up to 30kW; specifically designed for efficient water distribution.
The need to build tall buildings and the reduction of mains pressure to reduce leakages by water authorities has increased the necessity for alternative methods to provide high water pressure.

The self-learning algorithm is easy to setup and increases pump lifetime by minimising vibrations in the pump and pipes during starting and stopping whilst ensuring the pump starts and stops as close to the user setting as possible. The RSWT up to 25A (11kW @ 400V) comes in a compact 45mm housing thus facilitating replacement of contactors and star/delta starters.
The traditional three knob setting has been refined to just a single knob setting for the softstarting/ soft-stopping time of the pump which improves setup time, reduces human errors and tampering in the field.
RSWT is equipped with a number of integrated diagnostic functions including phase sequence, over- and under-voltage monitoring, locked rotor protection and also shorted SCR for improved pump protection in case of abnormal conditions. At just 75mm the RSWT can save vital panel space and reduce wiring time.
Soft starter status indication is provided by means of three LEDs (green, yellow, red) for supply, ramping, and alarm indication. Additionally, RSWT (45mm) is also equipped with two output relays for alarm (Normally closed – NC) and top of ramp (Normally Open – NO) indication. In case of the RSWT…V10/ V11. series, there is a 4th LED to select whether alarms follow an auto or manual recovery. In case of manual recovery of alarms, a push button is also available to reset the soft starter from alarm states. RSWT…32 up to RSWT…55 are also equipped with a run relay.
On top of the integrated overload, the PTC input can be used as further protection to ensure the pump does not overheat.
For more information contact:
Carlo Gavazzi UK Ltd,
4.4 Frimley Business Park, Frimley, Camberley, Surrey, GU16 7SG
Tel: (0) 1276 854110 Fax: (0) 1276 682140
Email: alison_stevens@carlogavazzi.co.uk
Web: www.carlogavazzi.co.uk

Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Phil Black - PII Editor

    I'm the Editor here at Process Industry Informer, where I have worked for the past 17 years. Please feel free to join in with the conversation, or register for our weekly E-newsletter and bi-monthly magazine here: https://www.processindustryinformer.com/magazine-registration. I look forward to hearing from you!
    Back to top button

    Join 25,000 process industry specialists and subscribe to:

    PII has a global network of suppliers ready to help...