t-mass thermal mass flowmeters Measure, monitor and save!
With the current move towards saving energy to achieve cost savings, there has been much interest in minimising the consumption of fuels and gases. So, when you’re looking for a proven performer for direct mass flow gas measurement applications, Endress+Hauser’s t-mass is the ideal solution – whether for compressed air, natural gas, biogas or other utility gas applications.
A plant can never run too efficiently, and t-mass is a powerful tool when it comes to rooting out waste and boosting performance. With a typical turndown of 100:1 and a negligible pressure loss, t-mass 65 is capable of accurately measuring both low flow rates and leakage. Available as an inline or insertion flowmeter, t-mass 65 can be supplied to suit a wide range of pipe sizes (DN15…1500), in circular or square ducting, and is ATEX-certified for use in hazardous areas. Better still, should you require it, Endress+Hauser’s insertion t-mass can be hot tapped, providing even more savings in terms of valuable production time.
With its integrated ‘gas engine’, choose from a list of 20 pure gases (for example, air, nitrogen, oxygen etc), and even customise a specific gas mixture, which is ideal for measuring biogas. By selecting and programming the pure gas (or gas mixture) directly on the device, you’re not so reliant on factory pre-sets and can configure t-mass to suit the requirements of your specific application. The data within the gas engine then provides an accurate flow measurement based upon real plant conditions.
Endress+Hauser’s t-mass thermal mass flowmeter is also geared up to operate as part of larger solutions, in particular energy management systems. By simply configuring the transmitter menu to provide an output based upon engineering units suitable for energy calculation, e.g. SCFM and m3/hr, t-mass measuring data can be used for monitoring & targeting purposes. This is particularly beneficial considering that small efficiency improvements in the energy-intensive compressor or boiler houses can achieve significant cost savings for your plant!
For further information please contact;
Maria Koutra   Â
Public Communications Assistant  Â
Endress+Hauser Ltd   Â
Floats Road
Manchester, M23 9NF
United Kingdom
Fax    +44 161 286 5093
Phone    +44 161 286 5000
Endress+Hauser UK
- +44 161 286 5000
- info@uk.endress.com
- https://www.uk.endress.com
- Floats Road Manchester M23 9NF GB
About us
A strong partner worldwide
Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimising processes in terms of economic efficiency, safety and environmental impact. Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, primaries & metal, oil & gas and water & wastewater.
Benefits
- Net sales of 2.4 billion euros – a strong partner
- More than 13,900 employees worldwide – a reliable employer
- Equity ratio of 71% – solidly financed
- Continuous annual investments of approximately 160 million euros – future-oriented
- Nearly 7,800 patents and patent applications – innovative and creative
Where we supply to
UK Ireland, Europe, Africa, Asia, Australia, South America, North America
Industries we supply to
Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater
-
Endress+Hauser Corporate video (English)
-
Micropilot FWR30 - The cloud connected radar level sensor - Demounting
-
Water is our life: meet Niek Brink from Endress+Hauser
