Ultrasonic Flow Meter for Process & Control

Titan Enterprises 30/03/2016

225 1 minute read

Listen to this article

Titan Enterprises announces the Process Atrato – a new low volume, high performance ultrasonic flow meter packaged to address the challenges of the process and control environment.

The compact Process Atrato flow meter combines all the technological advantages of market-leading Atrato ultrasonic technology (high linearity, high sensitivity, wide flow range linearity, no moving parts, fast response time, can be installed anywhere) with a new durable construction.

Built from 316 stainless steel and PEEK – the Process Atrato is supplied sealed to the IP65 standard. The combination of durable housing and top performance, in a very reliable flow meter, delivers a new tool for engineers at a reduced cost of ownership compared to existing flow measurement technologies serving the process and control market.

Rated for use up to 65°C and 20 Bar the Process Atrato is available in 4 models operating over flow ranges from 2 ml/min to 15 litres per minute, accuracy is ±1% over the whole flow range.

Each Process Atrato is calibrated with a pre-set “K” factor so all meters of the same flow range are fully interchangeable simplifying assembly and set-up procedures for OEM manufacturers looking to integrate the flow meter into their process and control set-up.

As standard the Process Atrato comes with two frequency outputs (PNP and NPN). Two multicolour LEDs indicate signal strength, power malfunctions and pulse outputs. Electrical connections are through a standard M12 four pin, sensor connector.

Using patented technology that enables it to operate with excellent accuracy over very wide flow ranges, the Atrato range of inline flow meters is a genuine breakthrough in flow meter technology.

The advanced Atrato signal processing system permits flow measurement across the whole Reynolds number range allowing both viscous and non-viscous products to be metered anywhere.

For further information on the Process Atrato ultrasonic flow meter visit here or contact Titan Enterprises on +44 (0)1935-812790 / dee@flowmeters.co.uk.

Contact Details About Us Latest News Latest Videos

Titan Enterprises Limited

01935812790
sales@flowmeters.co.uk
http://www.flowmeters.co.uk
Unit 2 5a Coldharbour Business Park, Sherborne Dorset, DT9 4JW GB

About us

With over 40-years experience in flow meter innovation, Titan Enterprises Ltd are a UK-based manufacturer of high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flow meters and the low flow Turbine flow meters and instrument range.

Our knowledgeable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application whether it is a low cost OEM solution or a specialist flowmeter in exotic materials. Titan supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical, offshire oil & gas industry, power, chemicals and mining.

For higher volume users we can custom design a flowmeter to match exact application requirements and thus not compromise achievable results with a less than ideal sensor.

At Titan we endeavour to produce devices that are inherently reliable as well as manufactured using the latest and most economical production technology. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.

We produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.

What we do in a nutshell

Titan Enterprises is a leading UK manufacturer and international supplier of high-performance liquid flow measurement solutions. We specialise in the design and production of small-bore, affordable off-the-shelf flow meters to bespoke flow sensors designed to customer specifications meeting specific flow ranges and environmental conditions.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Something interesting you may not know about us:

Titan's R&D spend is 20% of our turnover where the industry norm is 8-10%.

Precision and protection: Titan’s 800 Series flowmeters power peracetic acid dispensing systems

In modern medical pharmaceutical and hygiene applications, peracetic acid, commonly known as PAA, has become one of the most trusted...
Titan Enterprises Scoops “Highly Commended” Accolade for Manufacturer of the Year at Annual Awards

Titan Enterprises, a leading UK-based flowmeter manufacturer in Dorset, is proud to announce it has been Highly Commended in the...
Titan Enterprises Beverage Flow Meters: Turbine vs Ultrasonic – Which is Best for Your Application?

Selecting the right flow measurement technology is essential for reliable drinks dispensing, beverage production, and wider food and drink processing...
Titan Enterprises Develops Custom Calibration Rigs to Push New Frontiers in Ultrasonic Ultra-Low Flow Measurement

Titan Enterprises has issued a technical paper outlining the research and resolution of calibration issues that were encountered during the...
Optimising Hydraulic Performance: Precision Flow Measurement Challenges

Titan Enterprises shares practical insights to help engineers and operators address the challenges of precision flow metering, ensuring accurate measurements...
Why Total Cost of Ownership (TCO) Is Greater Than Purchase Price in Flow Measurement Systems

Titan Enterprises stresses the intangible cost benefits of low-maintenance, long-life flow meter technology where performance is balanced with long-term value.When...