Where Is Your Process Inefficiency Hiding? 6 Places To Look
The last 6 months have seen a wrath of unprecedented increases. Materials, Energy, Fuel, Raw materials and tax have in some cases been close to 3 times their cost in the past 12 months.
When the rises are in conjunction with labour and material shortages with growing worldwide uncertainty, there has never been a more important time to revaluate your process, see where processes can be improved, eliminate wastage, automate tasks, or generally do more done with less as a way to improve your bottom line and gain control of those elements within your grasp.
Inefficiency can hide in a number of places not always immediately apparent, here we discuss 6 places where inefficiency could be hiding:
Bulk Fluid Container Utilisation
Fluids, chemicals, flavourings or staples such as butter used as ingredients within processes are not always easy to decant from tubs, 205L drums, or IBCs due to their characteristics namely their viscosity.
Quite often containers can be returned to suppliers, partially filled with as much as 5-10% of liquid remaining within it, usually stuck to the sides of drums, or at the bottom of IBC’s which can be recovered providing the right pump technology is Invested in, with fluid recovery rates between 97-99%.
Quite often it is not only the amount of liquid which is extracted from a container which is important but how the liquid is handled and how accurately measures are dispensed.
Consistency of Results
Some materials are ‘shear sensitive’ meaning they are sensitive in the way they are handled or transferred.
If agitated too much, fats can separate out from the liquid or mixtures change in consistency from what is expected. This can often lead to batches being rejected or inconsistent final recipes increasing wastage.
Having a pump which can accurately dispense fluids repeatedly at the touch of a button ensures whatever recipe is created, it is the same every time.
Manual Handling
Manual handling is often used during the initial stages of trialing a new process or method.
When a new process, technique, additive, or mixture is created, it is sometimes necessary for personnel to manually test it, refining procedures until they work as desired.
But what if this new process creates an unforeseen issue and not reviewed after implementation?
Manual handling is often a process where users see the most benefit from automating by reducing risk of spillage, accidents, inconsistency of results and increase speed of dispensing.
Maintenance
Frequent spare part usage can often be a sign that something is not quite right within a process. Sometimes it can be taken as a given, that Mechanical Seals, O Rings, Stators, Diaphragms or Peristaltic Pump hose failure are a cost of the process. By undertaking failure analysis with a trusted pump supplier insight can be obtained if the rate of failure is normal and is as expected.
Sometimes small changes may be required such as the changing of a packed gland seal to a mechanical seal to help recover any fluid lost which is not charged for. On other occasions it could be that the pump type needs altering.
If Pump cleaning is performed manually, automating it for cleaning via CIP, or changing to a low maintenance pump design can accelerate the speed in which colour, recipe or production changes are carried out reducing downtime.
Should a pump be operating for over 10 hours a day its energy efficiency rating should be checked as older motors are rated as IE1 which can be between 5-20% less efficient than premium efficiency IE3 or IE4 motors.
Pump age can also play a part in improving results, where newer more efficient designs are available for applications. Often the greatest cost of ownership derive from maintaining and running the unit, so it often pays to upgrade should the unit be several years old.
System Calibration / Set Up
Pumps are not intelligent by design. Their performance is typically controlled via the system, which can often mean pumps are controlled by the closing of valves to reduce or stop flow, or recirculate flow.
Although the flow of a pump may have stopped, its power consumption remains the same, and if stopped abruptly or ran against a closed valve there is the potential for damage to be incurred.
By utilising a variable speed drive it reduce energy usage by more than 50%, with associated savings made in spare part usage and maintenance too.
Pump Set up & type
As pumps are controlled by the system they are installed in, there are certain telltale signs that equipment is not working as it should. It could sound excessively noisy, be vibrating heavily, or produce less flow than normal.
Having a pump operating at full speed only within a process – in particular cooling applications is worth investigating to see if the pump and process could operate at a variable rate.
Similarly if a pump is frequently operating with a relief valve open this is a sign that the pump set up can be optimised.
Pressure reducing valves
In systems where pressures are too high for the next stage of a process, pressure reducing valves can be used to reduce incoming pressure.
When these are used the energy within the liquid is dissipated and wasted within the valve. If pressure reducing valves are used frequently in plants operating 24/7 there are possibilities to recover this energy via a Pump as Turbine which recovers the energy as reducing the pressure.
If you are looking at ways to improve a process, minimise wastage, improve productivity or downtime, speak to North Ridge Pumps on 01773 302 660, via Live Chat, or email sales@northridgepumps.com to discuss your process and see how we can help.
North Ridge Pumps
- 01773302660
- sales@northridgepumps.com
- http://www.northridgepumps.com
- North Ridge House 3 Chrysalis Way Eastwood Nottinghamshire NG16 3RY GB
About us
North Ridge Pumps are an independent manufacturer and distributor of pumps. Having been established since 1998, we have a vast array of experience having become accustomed to supplying pumps for most processes.
We work within a range of industries both UK and Internationally, specifying pumps for a wide variety of applications from the transfer of corrosive and aggressive chemicals, to dewatered sludge, viscous grease, resin, glues, food and Seawater.
Our pumps range from standard centrifugal and multistage pumps, to immersed and process overhung solid handling pumps. We also supply a wide range of positive displacement pumps including Vane, Piston, Progressing Cavity and Peristaltic enabling us to specify more than one solution for your application, but also ensuring the majority of applications remain within our reach.
We offer the following services:
Technical support – We know at times pump selection is difficult. Pump selections are made with confidence by technical sales engineers who understand your process, ensuring equipment is engineered beyond your needs.
To select the correct technical solution for your requirement, longevity of design is prioritised. If there are existing issues you need assistance with, we work with you to solve these which could be high maintenance costs, frequent service periods, repeated equipment breakdown leading to lost revenue, inconsistent flow rates, clogging or where pumped product is inconsistent.
Application experience – Due to our 20 years of application experience we work with you to ensure our pumps operate according to your desired application. Our experience means we have most likely provided a solution for a similar process previously. With proven results, we know how to achieve your outcome sooner.
As our pumps are completely configurable, we design pumps with materials according to your requirement, and to your required duty point. Pumps are engineered specifically for your process whether they be baseplate mounted, within a mobile frame or in kit form with couplings, hoses, and dispensing nozzle.
Industry knowledge – We have a thorough understanding of a range of industries through experience from supplying the offshore oil and gas market, to paper mills, chemical plants and food manufacturers to name a few.
We not only understand the importance of downtime but also what each process requires and how small design improvements specific to the nature of your industry and application can reduce downtime, facilitate maintenance and improve longevity.
If you have a process or application you require a pump for, or a process which requires improving, get in touch to see how we can help.
What we do in a nutshell
Pump Specification & Supply
-
Metering Nanocomposites for 3D Printing Applications
Additive manufacturing, commonly known as 3D printing, is an innovative technology that enables the manufacture of complex components layer by...
-
Easy-to-clean low maintenance epoxy resin injection pump for mould filling
Epoxy resins are extremely hard to pump due to their high viscosity, sensitivity to shear and fast setting on mixing....
-
Two Multistage Pumps Boost Cement Plant's Performance
Dewatering is a critical mining operation that ensures smooth running of mines and renders the mine cost-effective. It performs a...
-
Safe and Efficient Low-Pressure Tanker Discharge for Environmentally Friendly Bitumen Emulsion Handling
Enhanced Safety and Efficiency in Bitumen, Oil, and Chemical Transport Traditionally, road tankers that carry viscous materials like bitumen, oils,...
-
Your Process- Revolutionised. Controlled. Simplified.
When it comes to the dosing, metering or transfer of aggressive chemicals or abrasive solid laden mixtures there is often...
-
Easy Clean Pumps improve Lecithin and Cream transfer at a UK food manufacturing plant
In our latest case study, we’re discussing three new hygienic progressing cavity pumps we supplied to a UK food manufacturer....
