When a motor is new the dielectric strength of the insulation is high. Overtime this slowly deteriorates with potential for problems. Operating environment and process variables can also adversely affect the motor’s life. Periodic motor monitoring will detect problems prior to likely failure, with all that implies for the process or operation.
Baker offer two testing types, namely offline and online:-
Subscribe to PII and receive:
Our long-established bi-monthly digital magazine *Process Industry Informer*, featuring exclusive articles, news and updates across the Process Industries, plus commentary from our three industry experts:
Sean Moran
Gavin Smith
Dave Green
PLUS:
- Process Industry Update — our weekly e-newsletter
- PII Podcast
- Special messages from our advertising partners
The Offline Equipment
The offline equipment (AWA) is used to test the insulation system of the motor under bench test. These could be process motors, rail traction motors, wind generators, etc.
The test units provide a winding resistance test, a meg-ohm test, a PI test, a DC hipotential test (or ramp voltage test, or step voltage test), and finally a surge test.
The surge test is the most important test offered, as it is able to detect weak insulation between turns, coils and phases prior to the motor displaying any symptoms of the fault. By surge testing once or twice a year, particularly on your critical motors, weak insulation can be detected and remedial work scheduled.
The Megger is widely used for testing motors, but a Megger cannot detect weak insulation, turn to turn; only surge testing can detect intermittent shorting, made possible by weak insulation!
The Online Equipment
The ‘Explorer’ online tester monitors the power being fed to the motor. It also looks at the performance of the motor itself as well as looking for rotor bar faults, efficiency problems and overloading problems, and finally, as the unit looks at the instantaneous torque of the motor, the unit can separate electrical and mechanical issues.
These test units allow large industrial complexes to ensure motor reliability, reduce down time and detect inefficient motors, which are a major concern in these times of high-energy costs.
Baker testing systems for both on line (live) and off-line (bench) testing are in use world wide and are represented in the UK and Ireland by Whitelegg Ltd
For more information on motor condition monitoring and testing for your specific application, including booking a demonstration, contact:
Whitelegg / Baker Test
Email sales@whitelegg.com
www.whitelegg.com
+ 44(0)1293 526 230
