Fluids Handling

MSE Systems bring in Landia pumps and mixers to help treat potato effluent

Listen to this article

Following the successful installation two years ago of Landia Chopper Pumps and a Landia Aeration System, MSE Systems is set to install a further three units from Landia for one of the UK’s leading supplier of potatoes.

During an upgrade to the customer’s potato processing factory, Chesterfield-based MSE Systems found that the addition of a high-efficiency Dissolved Air Flotation (DAF) plant would improve the activated sludge process by reducing oxygen demand. 

Treatment of potato effluent
Treatment of potato effluent

To ensure that the plant could meet future needs, a new chemical addition system was introduced to remove suspended solids, free emulsified oils, grease and elevated residual phosphorus.

For odour control, an 11kW Landia AirJet system was installed to mix, aerate and control odours of screened potato effluent in a balance tank. In addition, two submersible Landia Chopper Pumps were brought in to pump screened potato effluent from a 4.5m deep pit (500m away), which included an additional 4m lift.

External airjet
External airjet

Andy Neal, Design Manager at MSE Systems, said: 

Our challenge, which meant utilising a very small footprint between the existing plants, was to help our customer meet and maintain a stringent Environment Agency discharge consent, so that they remain fully compliant. The Landia AirJet and Chopper Pumps have proved very reliable and cost-effective, so it gave us the confidence to invest further in this equipment as the best, long-term solution.”

He added: “For a new packing line, two submersible Landia Chopper Pumps will pump potato effluent, whilst a Landia Jet Mix system will mix organic sludge (dissolved solids 3-5%) in a 60m3 tank”.

MSE Systems ensured that the initial installation proceeded with the minimal amount of disruption, in order for their customer to reopen on schedule. Despite the tight time frame, the new wastewater treatment plant was delivered by MSE Systems ahead of deadline and within budget.

www.msesystems.co.uk

www.landia.co.uk

Landia

Landia Ltd

About us

Landia's headquarters are located in Lem, which is how it has been since 1933. Today, Landia has subsidiaries in England, Germany, Norway and the US, and a sales office in China. In addition, Landia products are sold in 45 countries worldwide. Landia supplies pumping and mixing solutions to many different industries, with the most important ones being agriculture, wastewater, biogas plants and the fish industry. In general, you will find Landia's products wherever there is a difficult medium to be pumped or mixed. Landia survives by selling quality solutions in close partnership with the customers.

Landia is not a supermarket where customers select products from the shelves. Our technical sales people are always in close discussions with customers, which ensures solutions that work. For Landia, quality in every phase a matter of course, and we have been ISO9001 certified since 1994. Quality also means that many of Landia's products have been in operation for 20-25 years even though the operating conditions may be extreme. In that way, Landia's customers achieve the lowest lifespan costs, while resource consumption is minimised, which further results in a positive impact on the environment.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Chemicals

  • Landia GasMix operating in tank

  • LANDIA's EradiGator - Heavy Duty Chopper Pump Mixes & Chops To Clean Your Wet Well

  • POPL Tarm WWTP

Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Back to top button

    Join 25,000 process industry specialists and subscribe to:

    PII has a global network of suppliers ready to help...