River monitoring system with Qdos pumps supports environmental protection and public health
Fluids Handling

River monitoring system with Qdos pumps supports environmental protection and public health

Photo of Phil Black - PII Editor Phil Black - PII Editor Follow on X Send an email 05/11/2025
349 2 minutes read
Listen to this article

A new monitoring device featuring a Qdos peristaltic pump now provides wild swimmers with real-time data on the health of rivers.

Qdos peristaltic pumps play a key role in a new monitoring system that is being used to track the quality of river water in the UK, providing immediate real-time data with significant environmental and health benefits for wild swimmers.

Working with the Environment Agency and Meteor Communications, the River Severn Partnership has installed two monitoring units: one on the River Teme at Ludlow and another on the River Severn at Shrewsbury, both in Shropshire, England.

In February 2025 the first monitor was installed on the River Teme at Ludlow, funded by the River Severn Partnership Advanced Wireless Innovation Region (RSPAWIR), and a second unit has now been commissioned on the River Severn at Shrewsbury.

Each monitoring system features a Qdos 120 peristaltic pump from WMFTS. The pump operates on an hourly basis, with the capability to increase to as little as every 15 minutes. This pump draws a sample of river water into an EXO multiparameter sonde platform and an E. coli analyser. Collected data are then sent to a mobile phone app, which allows users to check bathing water quality in real time.

Representative water samples are automatically pumped into the flow-cell using the in-built Qdos pump, which offers a flow rate of up to 2.6 L/min and a suction lift of up to 8 m. Once analysis of the sample is complete the water is returned, leaving the flow-cell empty. 

The systems combine a pumped multi-parameter monitor with an online E. coli micro-lab (Fluidion). Readings for water quality parameters such as dissolved oxygen, temperature, pH, turbidity and ammonium are made at up to 15-minute intervals, with E. coli measurements conducted on demand. Additional sensors for rainfall and further scientific measurements will also be integrated over time.

Unlike traditional, laboratory-based spot samplings that can take several days for results, this new monitoring system provides authorities and swimmers with live data to help them act quickly when water quality is changing. This also allows quicker investigation of the sources of potential pollution.

Selection of the Qdos pump over other types has been predicated on reliability, precision, and low maintenance requirements—key advantages when deployed at remote, unstaffed sites.


Jamie O’Sullivan-Roche, Sales Engineer at WMFTS, commented:

“This reliable sampling technology will increase the knowledge of the bacteriological levels in rivers and the Qdos pump really is the heart of this device. They act as valves as well as pumps, which simplifies the sampling system making them more reliable and flexible.

“Submersible pumps would need to run continuously during the monitoring cycle, are power hungry and can introduce air bubbles into the sample. But Qdos pumps do not cause aeration in the pumphead or affect the sample in any way.

“The reliability of the Qdos pumps means routine maintenance is not required. The Qdos pump-head contains its own internal lubrication system that dramatically reduces tube wear and has demonstrated a tube life of over two years when used for intermittent environmental monitoring.

“With the Qdos pump there is the reliability of no lost samples – if a sample is lost, there would be no data.
“The Qdos pump’s low power consumption and ability to run on 12-volt supplies make it an ideal solution for remote solar or fuel cell powered operation.

“Scientifically the river water monitoring systems are helping to build a better understanding of the levels and types of bacteria in the watercourse, their potential sources, how they are affected by the environment and how they affect the ecology.”

Further information can be found at www.wmfts.com

Watson Marlow
Premium Package

Watson-Marlow Fluid Technology Solutions

About us

Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.

We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.

The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:

Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

  • Flexicon PF7 tabletop peristaltic liquid filling machine

  • Sterile ReNu SU Technology cartridge

  • Quantum and ReNu SU Technology cartridge - Make sterile connections in non-sterile environments

Photo of Phil Black - PII Editor Phil Black - PII Editor Follow on X Send an email 05/11/2025
349 2 minutes read
Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Photo of Phil Black - PII Editor

    Phil Black - PII Editor

    I'm the Editor here at Process Industry Informer, where I have worked for the past 17 years. Please feel free to join in with the conversation, or register for our weekly E-newsletter and bi-monthly magazine here: https://www.processindustryinformer.com/magazine-registration. I look forward to hearing from you!
    Back to top button
    PII logo

    Read our latest issue here

    Join 25,000 process industry specialists and subscribe to:

    • Process Industry Informer bi-monthly magazine
    • Process Industry Update weekly E-newsletter
    • And our regular Podcast and Webinars
    Yes, Sign Me Up!

    PII has a global network of suppliers ready to help...