Centrifugal Pump Range Expanded to Include Hot Water Applications
MP Pumps has expanded its popular Tempuflo® centrifugal line to include pumps designed specifically for Hot Water applications. The Patented Tempuflo HTW Series joins the HTO Series, by offering four (4) models ranging from 1 HP to 20 HP.
The HTW Series provides a self-aligning compact installation with an integral air-cooled heat exchanger and seal chamber and is specifically designed for high temperature process manufacturing applications using; hot water, ethylene glycol, propylene glycol and triethylene glycol.
The isolator technology combined with the heat exchanger limits the seal cavity to a maximum temperature of 190°F (88°C) while the process fluid temperature reaches 400°F (204°C). The lower seal temperature greatly increases seal life, resulting in less down time for the end user.
The HTW 80 and HTW 120 models offer pressures to 135 Head Feet with flows to 90 and 195 GPM respectfully. These (2) models are available with either NPT or Flat Flange port options.
The HTW 180 has maximum pressure capability of 162 head feet and flows to 320 GPM. The HTW 300 can achieve 190 head feet with maximum flow capacity of 500 GPM when operating at the standard 3450 RPM. Both models are only available with Flat Flanges.
MP Pumps has been providing high quality centrifugal pumps for more than 70 years to the Industrial, Marine, Agriculture, Military and Transportation markets.
