FROM THE PUMP COMPANY LTD – DRY RUNNING SEAL-LESS MAGNETIC DRIVEN CHEMICAL PUMP IN THERMO PLASTIC MATERIALS
One of the biggest problems when using pumps is dry running, up till now; there have been no solid answers.
Never intentional, dry running occurs when, either the outlet valve is closed, the supply source runs dry or a filter is blocked. All too often operator error is the underlying reason and a catastrophic pump failure can result.
The ARGAL “Route” range of Seal-less Magnetic driven Chemical pumps can accommodate dry running when fitted with Carbon HD bearing bushes!
These pumps incorporate a patented “Two axial direction self alignment system” which introduces a secondary magnetic field to hold the impeller in a neutral position avoiding friction and an increase in heat.
The pumps are suitable for most chemicals with flows up to 48m3/h and heads of 40m. ATEX approved
Another example of from “Solid Answers to Fluid Questions” The Pump Company
For further information contact: The Pump Company Ltd, Crawley, West Sussex
Tel: 01293 533665, E mail info@thepumpco.co.uk Web: www.thepumpco.co.uk
