Fluids Handling

Bredel pumps reduce downtime and maintenance at Australian water treatment plant

Watson Marlow 07/10/2012

113 3 minutes read

Listen to this article

Progressive cavity pumps failed when pumping abrasive lime slurry
Piston diaphragm pumps failed when pumping corrosive chlorine
Both applications solved by replacing with Bredel SPX50 hose pumps

Since adopting Bredel SPX50 hose pumps from Watson-Marlow Pumps Group in various parts of its process, the water treatment plant at Kembla Grange has saved significant costs associated with downtime and maintenance. The pumps were selected for tough applications such as pumping abrasive lime slurry and corrosive chlorine solutions, which were causing expensive and inconvenient failures of existing pumps.

Reliability paramount

Located some 50 km south of Sydney, Australia, the water treatment and filtration plant at Kembla Grange is operated by Veolia Water. It produces 210 ML/day of high quality drinking water across the Illawarra region on behalf of Sydney Water. Failures and downtime are simply not conducive to efficient operations, so having reliable equipment that can be maintained safely and quickly is vital.

“When you add up the ongoing hassles of other pumps types, it became evident that Bredel pumps were our preference,” says PinoTaglieri, the plant’s Operations Supervisor. “The nature of the hose pump – it just pushes the lime aside with its shoe, they’re gutsy and get the job done.”

Hose pumps are well suited to water treatment processes as they move fluid by compressing a shoe on to a reinforced hose in a circular motion, pushing pockets of fluid downstream quickly and easily by positive displacement.

Abrasive lime slurry

Originally, two progressive cavity pumps had been specified and installed at Kembla Grange for dosing lime slurry, which is used to maintain and control pH in water. However, the abrasive nature of the substance wreaked havoc on the PC pump’s rotor and stators.

“It was hard to maintain the set-point flows and there were constant blockages,” states Mr Taglieri. “Depending on the demand we’d go through rotors and stators every couple of months, which was a costly exercise. On top of the parts, it would take two guys two hours to fix, plus the hassle of cleaning the lines. A few years ago we replaced these with Bredel SPX50s and the hoses last over a year. The performance of the pump was far beyond our expectations and we had huge cost savings.”

The inherent design of Bredel hose pumps means there are no intrusions in the flow path, eliminating any risk of blockages. This makes them particularly adept at handling problematic fluids such as abrasive lime, chemicals or sludge with high solids content, for example.

Corrosive chlorine

It was a similar story in another part of the plant where two piston diaphragm pumps were originally specified and installed to pump a chlorine solution into a 750mm main at 16 bar. Chlorine is a corrosive disinfectant, in effect bleach, making it a tough application.

“These pumps were a nightmare to maintain, the amount of time and effort involved as well as getting the parts. It would take up to a day and a half to get each pump up and running; from the set-up, the timing, etc.”

Mr Taglieri again turned to Bredel pumps for the solution. Bredel pumps are self-priming and dry-running, making them easy to start and stop. Relative to other pump types, Bredel hose pumps have one wearing part – the hose. In this instance, the two SPX50s installed at Kembla Grange were fitted with Hypalon hoses, which offer excellent chemical resistance.

“They last 3-4 months and take an hour to switch out – what a difference it has made,” adds Mr Taglieri.

Proven track record

In truth, these two applications are not the first time Bredel pump technology has saved the day at Kembla Grange. Mr Taglieri has been on site here since day one and has seen multiple investments in equipment upgrades over the years.

“We are constantly looking to improve the processes on site as new technology becomes available,” he says.

During the design phase of the plant in 1996, Mr Taglieri was engaged with consultants regarding some of the equipment selection. A Bredel SP100 sludge pump was installed in the drying bed area, and to this day, the site has only had to replace a single hose from wear over a 16 year period.

“We have an old 100mm Bredel pump used to transfer very thick sludge that is indestructible,” he confirms. “It is turned on for only 2-3 hours a week, but literally we have serviced it twice since it was commissioned. The first time was due to operator error, the second time it was from wear, that’s it.”

It is clear that the engineering behind Bredel hose pumps has more than paid off at Kembla Grange.

www.wmpg.co.uk

Contact Details About Us Latest News Latest Videos

Watson-Marlow Fluid Technology Solutions

01326370370
info@wmftg.co.uk
https://www.wmfts.com/
Bicklandwater Road, Falmouth Business Park, Falmouth, Cornwall, TR11 4RU GB

About us

Watson-Marlow Fluid Technology Group (WMFTG) peristaltic tube and hose pumps meet requirements including: value for money; low cost of ownership; reliability and ease of maintenance to the food and beverage, chemical, pharmaceutical, mining and many other industries.

We demonstrate how pumps deliver significant process efficiencies over the lifetime of the equipment. Whether performing flavouring addition in food processing, chemical metering in water treatment or mineral recovery, we have a solution which can cut pump downtime and reduce costs through higher accuracy metering and transfer. WMFTG has dedicated application engineers available to help customers make the right pump and tubing choice from a range providing microlitres per minute to 80 cubic metres per hour flow rates.

The only part of the pump to come into contact with the product is the tube or hose. This means there are no seals or valves that can wear or fail. Replacing the tube or hose can be performed quickly and safely. Peristaltic pump benefits include:

Total fluid containment with no seals No ancillaries Handle viscous and abrasive slurries and sludge Self-priming capability Dry running without damage to the pump In addition to their range of positive displacement pumps, Watson-Marlow Fluid Technology Group has added PTFE-lined chemical and industrial hoses to their range. Aflex hoses are reinforced to withstand the most severe conditions and use.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Watson-Marlow to showcase Bredel CIP pump and next-generation fluid handling at PPMA 2025

Watson-Marlow Fluid Technology Solutions (WMFTS) will unveil the latest Bredel CIP pump and its portfolio of next-generation fluid management technologies...
Watson-Marlow launches new Bredel CIP pump for beverage producers at drinktec

Watson-Marlow Fluid Technology Solutions (WMFTS) is launching its latest innovation for the brew and beverage market; the Bredel CIP pump,...
Bredel Hose Pump Solves Ash Slurry Problem at Biomass Plant

A Bredel 100 hose pump with an NR Transfer hose has been installed at a biomass power station in Pécs,...
Watson-Marlow Fluid Technology Solutions introduces WMArchitect Interchangeable Parts for robust single-use assemblies

Watson-Marlow Fluid Technology Solutions (WMFTS) has introduced WMArchitect Interchangeable Parts to improve the longevity of single-use assemblies. The introduction brings...
Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut

Watson-Marlow to Exhibit Peristaltic Pump and Fluid Path Technologies in London Biotechnology Show Debut Watson-Marlow Fluid Technology Solutions (WMFTS) will...
German Waste-to-Energy Plant Prolongs Hose Life Using Bredel NR Transfer Hoses

Abfallverbrennungs- und Biokompost GmbH (AVBKG), the German waste processing plant, has achieved significant hose maintenance and hose life savings. Based...