ON-LINE BROMIDE ANALYSIS IN DRINGING, SURFACE AND WASTEWATER WITH THE ADI 2018 PROCESS ION ANALYSER FROM METROHM UK

Phil Black - PII Editor 29/04/2008

186 1 minute read

Listen to this article

Bromide occurs naturally in surface and ground waters, particularly in areas of salt intrusion, and can also be present due to industrial and agricultural activity. Once in the natural water supply it can become a major issue for drinking water suppliers due to the generation of both bromate and trihalomethanes in drinking water processing.

The ADI 2018 Process Ion Analyzer from Applikon Analytical BV bridges the gap between the process and the laboratory by allowing bromide analysis to be carried out automatically on the raw water feed to drinking water processing.

The ADI 2018 Process Ion Analyzer will provide analysis for bromide at approximately 10 minute intervals and report data in the required format for compliance reporting and process control. Using the patented Dynamic Standard Addition method the analyzer will provide analysis without interference from matrix effects and validate each and every result as correct.

Applikon Analytical BV is part of the Metrohm group of companies and represented exclusively by Metrohm UK Ltd. In addition to the sale of analyzers Metrohm UK Ltd provide a full customer service including spares, training and service contracts.

For more information contact Metrohm UK Ltd, Buckingham, Bucks.

Tel 01280 824824 Fax: 01280 824800

E-mail: enquiry@metrohm.co.uk

Web: www.metrohm.co.uk/applikon