Fluids Handling

SALVATORE ROBUSCHI HAS LAUNCHED A NEW RANGE OF CANTILEVER PUMPS

Phil Black - PII Editor 22/06/2010

201 1 minute read

Listen to this article

Help for Self Priming or Submersible Pumps

If you have ever encountered problems pumping from a tank or sump containing hot liquids, contaminated or loaded fluids; if you suffer regular mechanical seal or bearing failure or you just can’t get your self priming or submersible pump to perform – don’t worry help is at hand.

What is a Cantilever Pump?

It’s a pump that has no bearings or bushing submerged in the liquid and there is no mechanical seal!

The Cantilever pump is not affected by temperature and can pump liquids in excess of 500ºC and it can empty tanks and sumps up to 5m in depth.

The Salvatore Robuschi Cantilever Pump has almost no maintenance costs, it can also run dry and without level controls if required, it will immediately prime when liquid returns to the sump and covers the casing

The pump can be fitted with impellers to handle abrasives or solid materials without flushing

Manufactured in either AISI 316 or Cast Iron, the pump employs heavy duty bearings located outside of the liquid. It is available with a variety of impellers; from closed, semi open, channel and vortex and can handle a variety of liquids

Available in column lengths from 0.3 – 1.5m and with the addition of a suction pipe can give up to 5m suction lift.

Capable of pumping very high product temperatures it can be mounted internal or external to the tank.

Available in the UK exclusively from The Pump Company Ltd

If you want to save money on this maintenance free pump, contact us today!

Another example of The Pump Company providing “Solid Answers to Fluid Questions”

For more information contact;

The Pump Company, Crawley, West Sussex
Tel: +44 (0) 1293 533 665 Fax: +44 (0) 1293 533 664 Mob: +44 (0) 7894 098077

E-mail: Peter.staddon@thepumpco.co.uk Web: www.thepumpco.co.uk