DRTB Thermocouple Terminal Block Using Thermocouple Alloys to Guarantee Accurate Readings

Phil Black - PII Editor 17/08/2010

172 1 minute read

Listen to this article

DRTB Thermocouple Terminal Block

Omega Engineering introduces the New DRTB Series thermocouple terminal blocks. They are designed and manufactured by Omega using thermocouple alloys to guarantee accurate readings. The terminal block has a built-in female socket to accept a miniature thermocouple connector. This novel feature enables the user to insert a plug for easy connection to a handheld device allowing installation testing, quality assurance compliance, troubleshooting or repairs without interrupting the signal or circuit.

The terminal blocks are fully enclosed and require no end plates. The screws and clamps are zinc plated and together they provide an excellent vibration, maintenance free and corrosion resistant connection.

DRTB terminal blocks mount on standard 35 mm DIN rails or 32 mm G-type rails and are identified with calibration type and positive (+) and negative (-) connections. Wire entry is funnelled to allow quick wire insertion even with stranded wire.

To view the full details and learn more, please visit:

http://www.omega.co.uk/ppt/pptsc.asp?ref=DRTB&Nav=autG02

OMEGA ENGINEERING LIMITED
ONE OMEGA DRIVE | RIVER BEND TECHNOLOGY CENTRE
NORTHBANK IRLAM | MANCHESTER M44 5BD | UK
FREEPHONE SALES 0800 488 488 (UK ONLY)

E-mail: sales@omega.co.uk
Tel: +44 (0)161 777 6611