Sandvik Process Systems launches fourth generation Rotoform -The future of granulation

Phil Black - PII Editor 01/08/2012

429 2 minutes read

Listen to this article

Sandvik Process Systems has used ACHEMA 2012 to launch its newly developed Rotoform® 4G system, the latest generation of a system first introduced in 1980 and now widely recognised as the standard solution for granulating a wide range of chemical melts including sulphur, waxes, resins and agrochemicals.

Building on the experience gained over 30+ years and the design of a Rotoform family that now numbers 10 different models, each meeting the needs of a different sector, Sandvik has redesigned and reengineered a number of key system functions to deliver increased availability, higher productivity and improved product quality.

System enhancements include a redesigned refeed bar which simplifies operation and improves product quality, a lifting device to streamline servicing, and new bearing units that reduce maintenance requirements.

The overall principle remains the same, with a one-step melt-to-solid granulation process delivering consistently sized, free-flowing, dust-free pastilles. Molten product is fed onto a continuously running steel belt in the form of droplets. These are solidified by means of cooling water sprayed against the underside of the belt. This indirect cooling is not only highly efficient but also means no risk of cross-contamination between product and cooling water.

“The 4G model is based on the proven Sandvik Rotoform® process and represents a significant step forward compared with its predecessor, the RF3000,” explains Matthias Kleinhans, Managing Director of Sandvik Process Systems. “The new system enables easier operation and also reduces the servicing and maintenance requirement. This means lower running costs and an attractive ROI.”

The new 4G model is fitted with a pneumatic refeed bar that is raised to the correct operating position at the touch of a button. Automatic positioning of the heated refeed bar ensures that any surplus material left on the depositor after the drops have been placed on the steel belt is forced back through a channel in the Rotoform. It is then remixed with the product and returned to the production process.

The bearing units are fitted with enhanced mechanical seals that improve reliability and reduce maintenance work. Instead of a standard chain drive, a low-maintenance toothed drive belt can be installed as an option. This further reduces servicing work as the belt no longer needs retensioning or lubricating, while replacement is also a quick and easy job at the end of the belt”s lifetime.

The safety hood of the 4G model has been redesigned to ensure full enclosure of all hot and movable parts, ensuring maximum operator safety. The system only operates with the safety hood closed.

A significantly reduced “product dead zone” also ensures a lower maintenance requirement. The Rotoform unit can be cleaned quickly and easily, allowing fast, uncomplicated changeover to another product. The feedstock leaves no residues, so that the resulting end product is of a better quality. This provides considerable flexibility in the production process.