Yokogawa power measurement software provides complete solution for the latest standby power testing standards

A new power measurement software package for the Yokogawa range of precision power analysers provides a complete solution for the testing of standby power in accordance with the latest IEC62301 Ed.2.0 (international) and EN50564:2011 (European) standards.

The software, designed for use with the Yokogawa WT210, WT500, WT1800 and WT3000 power analysers, is targeted at manufacturers of domestic electrical appliances and related equipment, who need accurate measurements to ensure that their products operate at optimum energy efficiency with minimum standby power consumption.

“The standby mode on electrical appliances has long been in use and is mostly taken for granted by consumers”, comments Terry Marrinan, Yokogawa”s Vice President, Test & Measurement, for Europe & Africa: “The fact that in this mode the equipment is consuming electricity – and that this is something of which most people are unaware – has been a major concern for regulators.”

“A recent estimate that by 2020 appliances using standby mode will contribute as much as 50 terawatt-hours of electricity consumption per year – similar to the annual electricity consumption of a country such as Portugal or Greece – emphasises the importance of this issue.  Ensuring that manufacturers improve the efficiency of equipment in the standby mode can lead to significant reduction in electricity consumption”.

The new standards will help to ensure that power efficiency is incorporated into all the key stages of the product manufacturing process, and Yokogawa”s world-class measurement solutions will, in turn, help the industry to develop products with lower standby power consumption in compliance with the IEC and EN standards.

Yokogawa”s long experience and knowledge of power measurement is key to manufacturers meeting these standards with benefits for the consumer and the wider environment: “By addressing these issues, we are helping not only the manufacturers but also the consumers, the economy and – last but not least – the environment”, added Terry Marrinan.

The EU has supported an initiative by the International Energy Agency to limit the standby power consumption of a single piece of equipment to 1 W, a threshold which is expected to decrease to 0.5 W by 2013.  These guidelines have been adopted by the International Electrotechnical Commission (IEC), which has recently released the second edition of its International Standard IEC 62301 (Household electrical appliance – Measurement of standby power). The European EN50564:2011 standard adopts a similar approach.

These standards define the relevant test conditions for accurate measurement of standby power, and emphasise the fact that determination of the relevant low power levels requires accurate measurement – an area in which the Yokogawa range of power analysers is well established.

Functions provided by the new Yokogawa standby power measurement software include communications between the host PC and the relevant Yokogawa instrument, measurement of power data as defined in the standards, report preparation and production, and saving to the appropriate storage medium.

Electrical parameters measured include total harmonic distortion, crest factor, voltage, frequency, power variation and accumulated energy. In addition, although they are not required by the standard, apparent power and power factor are also measured as reference values.

The software uses both the sampling method and the average reading method defined in the standard, and provides a measurement time check. An “auto” measurement mode checks data stability every ten seconds according to the algorithms defined in IEC62301 and can automatically end the test once stability and the test conditions have been met. A text entry function allows information other than the measured values to be entered for incorporation in a report. The report is generated as a PDF file and the measurements are also available in .CSV format.

Yokogawa”s range of power measurement equipment features a high level of functionality, performance consistency, reliability, and the ability to support a wide range of applications. It ranges from the portable, low-cost WT210 digital power meter to the WT1800 and WT3000 precision power analysers, which use high-speed digital processing to carry out accurate measurements under the most challenging conditions.

For further information about the Yokogawa range of precision power analysers visit www.tmi.yokogawa.com

For further information please contact:

Terry Marrinan
European Test & Measurement Centre
Yokogawa Europe BV
Euroweg 2
3825 HD Amersfoort
The Netherlands

Tel: +31 (0) 88 464 1811
Fax: +31 (0) 88 464 1111
mailto:terry.marrinan@nl.yokogawa.com