Titan Enterprises takes an engineering-led approach to sustainability
Titan Enterprises is integrating sustainability into product development, manufacturing, sourcing and customer applications, with a focus on reducing the environmental impact of its operations while helping customers achieve more resource-efficient processes.
As a specialist manufacturer of liquid flow measurement equipment, the company is considering sustainability across the lifecycle of its products, from material selection and manufacturing through to their performance and use in industrial applications.
This approach is outlined in Titan’s Environmental Policy, which identifies waste reduction, lower energy consumption, reduced transportation, product design reviews and the investigation of alternative materials as priorities for continuous improvement.
“Environmental responsibility has to be approached as a long-term engineering challenge,” says Neil Hannay, Senior R&D Engineer at Titan Enterprises. “It is about the decisions we make from the raw materials and how we manufacture, to the energy we consume and how our products enable customers to adopt new technologies and processes.”
Reducing environmental impact at source
Energy consumption is a key focus for Titan. In 2024, the company installed two solar panel arrays at its UK manufacturing facility, helping to generate renewable electricity and offset approximately six tonnes of CO₂ annually.
It is also working to improve energy efficiency across its facility, including upgrading lighting, reviewing manufacturing processes and identifying further opportunities to reduce consumption.
Waste reduction is another priority. Replacing printed technical documentation with QR-code-based digital information has reduced paper use while improving access to product information. The company has also replaced traditional packaging materials with recyclable cardboard and biodegradable fillers.
Titan is investigating opportunities to recycle old or rejected electronic printed circuit boards (PCBs) generated through research and development and production, extending its focus on resource efficiency beyond the manufacturing process.
Engineering for a changing materials landscape
Product development is another important part of Titan’s sustainability strategy. The company is investigating alternative materials that could reduce reliance on substances of increasing environmental concern, while continuing to meet the performance, regulatory and durability requirements of flow measurement applications.
This includes the evaluation of PFAS-free materials for its turbine flowmeter range, as regulatory scrutiny of fluorinated substances increases.
Titan is testing alternative materials to assess their chemical resistance, dimensional stability, longevity and flow performance within the complete flowmeter design.
Supporting customers with more sustainable applications
Titan’s approach also extends to the applications in which its flowmeters are used.
One example is its work with Grinsty Rail, whose vehicle-mounted de-icing systems were adapted to use a more environmentally friendly, biodegradable de-icing fluid.
Changing the fluid formulation presented an engineering challenge. The alternative had different physical characteristics, including higher viscosity and a colour that affected the existing optical flow sensors.
Titan worked with Grinsty Rail to identify a suitable alternative, with its OG2 oval gear flowmeter selected to provide reliable measurement of the new fluid.
The project demonstrates how adopting more environmentally responsible fluids can introduce additional technical requirements, and how appropriate flow measurement technology can help customers adapt their systems.
Improving resource efficiency through precision measurement
Accurate measurement and control of liquid volumes can also contribute to more efficient processes. Whether dosing chemicals, lubricants, cleaning agents or other process fluids, precise flow measurement can help minimise over-dosing, reduce waste and maintain process consistency.
Titan’s development of increasingly capable low-flow technologies, including ultrasonic measurement below 2 ml/min, is creating opportunities for applications where accurate measurement of very small liquid volumes is essential.
Building sustainability into the supply chain
Alongside product innovation, Titan is strengthening relationships with UK-based suppliers while diversifying its supply chain and investigating alternative materials to improve resilience and reduce environmental impact.
“Working closely with our suppliers gives us much greater visibility of what is possible,” says Jeremy Thorne, Operations Manager at Titan Enterprises. “It enables us to investigate different materials and manufacturing approaches while maintaining the quality and reliability our customers expect.”
A long-term approach to sustainable growth
Titan recognises that improving manufacturing sustainability requires a combination of measures rather than a single solution. Its approach brings together renewable energy, waste reduction, responsible material selection, supply chain development, product longevity and engineering innovation.
The company says sustainability will remain closely linked to its investment in R&D and its relationships with OEMs and end users. This includes helping customers measure alternative fluids and developing flowmeters using new materials and technologies.
“Our objective is not to treat sustainability as a separate initiative,” concludes Neil Hannay. “We want it to become part of how we think about design engineering, manufacturing and supporting our customers. By making considered improvements across the business, we can reduce our own environmental impact while helping customers develop more efficient and sustainable systems.”
For further information, visit www.flowmeters.co.uk.
Titan Enterprises Limited
- 01935812790
- sales@flowmeters.co.uk
- http://www.flowmeters.co.uk
- Unit 2 5a Coldharbour Business Park, Sherborne Dorset, DT9 4JW GB
About us
With over 40-years experience in flow meter innovation, Titan Enterprises Ltd are a UK-based manufacturer of high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flow meters and the low flow Turbine flow meters and instrument range.
Our knowledgeable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application whether it is a low cost OEM solution or a specialist flowmeter in exotic materials. Titan supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical, offshire oil & gas industry, power, chemicals and mining.
For higher volume users we can custom design a flowmeter to match exact application requirements and thus not compromise achievable results with a less than ideal sensor.
At Titan we endeavour to produce devices that are inherently reliable as well as manufactured using the latest and most economical production technology. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.
We produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.
What we do in a nutshell
Titan Enterprises is a leading UK manufacturer and international supplier of high-performance liquid flow measurement solutions. We specialise in the design and production of small-bore, affordable off-the-shelf flow meters to bespoke flow sensors designed to customer specifications meeting specific flow ranges and environmental conditions.
Where we supply to
Europe, Africa, Asia, Australia, South America, North America
Industries we supply to
Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater
Something interesting you may not know about us:
Titan's R&D spend is 20% of our turnover where the industry norm is 8-10%.
-
Titan Enterprises takes an engineering-led approach to sustainability
Titan Enterprises is integrating sustainability into product development, manufacturing, sourcing and customer applications, with a focus on reducing the environmental...
-
Precision in Practice: Why Skilled Manufacturing Remains Central to Titan Enterprises
As demand for sophisticated flow measurement technology continues to grow across industry, manufacturers face an evolving challenge: how to increase...
-
How Temperature and Pressure Influence Liquid Flow Measurement Accuracy
Accurate liquid flow measurement can rarely be determined by the flow sensor alone. Temperature, pressure, viscosity and the physical properties...
-
Titan Enterprises Advances PFAS-Free Materials for Turbine Flowmeters
Engineering validation programme assesses high-performance non-PFAS materials to support regulatory readiness and maintain flow measurement performance Titan Enterprises is undertaking...
-
Titan Enterprises launches redesigned hygienic oval gear flowmeters for process industries
Titan Enterprises has introduced a newly engineered generation of its OG3 and OG4 hygienic oval gear flowmeters, delivering enhanced performance...
-
Powering Reliable Rail Performance with Long-Life Flow Measurement Solutions
How Titan Enterprises supports Grinsty Rail with reliable rail de-icing system performance In the rail industry, reliability is every bit...
-
Atrato Ultrasonic Flowmeter from Titan Enterprises, designed by Trevor Forster


















