Company newsNews & Events

Titan Enterprises takes an engineering-led approach to sustainability

Listen to this article

Titan Enterprises is integrating sustainability into product development, manufacturing, sourcing and customer applications, with a focus on reducing the environmental impact of its operations while helping customers achieve more resource-efficient processes.

As a specialist manufacturer of liquid flow measurement equipment, the company is considering sustainability across the lifecycle of its products, from material selection and manufacturing through to their performance and use in industrial applications.

This approach is outlined in Titan’s Environmental Policy, which identifies waste reduction, lower energy consumption, reduced transportation, product design reviews and the investigation of alternative materials as priorities for continuous improvement.

“Environmental responsibility has to be approached as a long-term engineering challenge,” says Neil Hannay, Senior R&D Engineer at Titan Enterprises. “It is about the decisions we make from the raw materials and how we manufacture, to the energy we consume and how our products enable customers to adopt new technologies and processes.”

Reducing environmental impact at source

Energy consumption is a key focus for Titan. In 2024, the company installed two solar panel arrays at its UK manufacturing facility, helping to generate renewable electricity and offset approximately six tonnes of CO₂ annually.

It is also working to improve energy efficiency across its facility, including upgrading lighting, reviewing manufacturing processes and identifying further opportunities to reduce consumption.

Waste reduction is another priority. Replacing printed technical documentation with QR-code-based digital information has reduced paper use while improving access to product information. The company has also replaced traditional packaging materials with recyclable cardboard and biodegradable fillers.

Titan is investigating opportunities to recycle old or rejected electronic printed circuit boards (PCBs) generated through research and development and production, extending its focus on resource efficiency beyond the manufacturing process.

Engineering for a changing materials landscape

Product development is another important part of Titan’s sustainability strategy. The company is investigating alternative materials that could reduce reliance on substances of increasing environmental concern, while continuing to meet the performance, regulatory and durability requirements of flow measurement applications.

This includes the evaluation of PFAS-free materials for its turbine flowmeter range, as regulatory scrutiny of fluorinated substances increases.

Titan is testing alternative materials to assess their chemical resistance, dimensional stability, longevity and flow performance within the complete flowmeter design.

Supporting customers with more sustainable applications

Titan’s approach also extends to the applications in which its flowmeters are used.

One example is its work with Grinsty Rail, whose vehicle-mounted de-icing systems were adapted to use a more environmentally friendly, biodegradable de-icing fluid.

Changing the fluid formulation presented an engineering challenge. The alternative had different physical characteristics, including higher viscosity and a colour that affected the existing optical flow sensors.

Titan worked with Grinsty Rail to identify a suitable alternative, with its OG2 oval gear flowmeter selected to provide reliable measurement of the new fluid.

The project demonstrates how adopting more environmentally responsible fluids can introduce additional technical requirements, and how appropriate flow measurement technology can help customers adapt their systems.

Improving resource efficiency through precision measurement

Accurate measurement and control of liquid volumes can also contribute to more efficient processes. Whether dosing chemicals, lubricants, cleaning agents or other process fluids, precise flow measurement can help minimise over-dosing, reduce waste and maintain process consistency.

Titan’s development of increasingly capable low-flow technologies, including ultrasonic measurement below 2 ml/min, is creating opportunities for applications where accurate measurement of very small liquid volumes is essential.

Building sustainability into the supply chain

Alongside product innovation, Titan is strengthening relationships with UK-based suppliers while diversifying its supply chain and investigating alternative materials to improve resilience and reduce environmental impact.

“Working closely with our suppliers gives us much greater visibility of what is possible,” says Jeremy Thorne, Operations Manager at Titan Enterprises. “It enables us to investigate different materials and manufacturing approaches while maintaining the quality and reliability our customers expect.”

A long-term approach to sustainable growth

Titan recognises that improving manufacturing sustainability requires a combination of measures rather than a single solution. Its approach brings together renewable energy, waste reduction, responsible material selection, supply chain development, product longevity and engineering innovation.

The company says sustainability will remain closely linked to its investment in R&D and its relationships with OEMs and end users. This includes helping customers measure alternative fluids and developing flowmeters using new materials and technologies.

“Our objective is not to treat sustainability as a separate initiative,” concludes Neil Hannay. “We want it to become part of how we think about design engineering, manufacturing and supporting our customers. By making considered improvements across the business, we can reduce our own environmental impact while helping customers develop more efficient and sustainable systems.”

For further information, visit www.flowmeters.co.uk.

Titan Enterprises
Advance Package

Titan Enterprises Limited

Titan banner-logo-625px PII

About us

With over 40-years experience in flow meter innovation, Titan Enterprises Ltd are a UK-based manufacturer of high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flow meters and the low flow Turbine flow meters and instrument range.

Our knowledgeable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application whether it is a low cost OEM solution or a specialist flowmeter in exotic materials. Titan supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical, offshire oil & gas industry, power, chemicals and mining.

For higher volume users we can custom design a flowmeter to match exact application requirements and thus not compromise achievable results with a less than ideal sensor.

At Titan we endeavour to produce devices that are inherently reliable as well as manufactured using the latest and most economical production technology. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.

We produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.

What we do in a nutshell

Titan Enterprises is a leading UK manufacturer and international supplier of high-performance liquid flow measurement solutions. We specialise in the design and production of small-bore, affordable off-the-shelf flow meters to bespoke flow sensors designed to customer specifications meeting specific flow ranges and environmental conditions.

Where we supply to

Europe, Africa, Asia, Australia, South America, North America

Industries we supply to

Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater

Something interesting you may not know about us:

Titan's R&D spend is 20% of our turnover where the industry norm is 8-10%.

  • Atrato Ultrasonic Flowmeter from Titan Enterprises, designed by Trevor Forster

Show More

    Would you like further information about this article?

    Add your details below and we'll be in touch ASAP!


    Input this code: captcha

    Back to top button

    Join 25,000 process industry specialists and subscribe to:

    PII has a global network of suppliers ready to help...