Accurate and safe flow measurement in hazardous conditions relies on flowmeters equipped to meet strict compliance standards. These include Explosion Proof, Intrinsically Safe, Encapsulated and Non-Sparking classifications. In many cases, installations must use equipment compliant with ATEX or similar certifications.
Titan Enterprises’ oval gear flowmeters are designed for such environments and can be fitted with either a NAMUR sensor or a reed switch (simple apparatus) for use in hazardous areas
A fully-certified NAMUR proximity switch is an intrinsically safe sensor with specific design capabilities aimed specifically at hazardous environments where explosive gases, dust, or fibers may exist.
A NAMUR switch embedded in a flowmeter with the corresponding amplifier will meet the ATEX requirements, and the device is able to give an accurate measurement in difficult conditions. Ideally, the electronics of the flow device should be housed in a safe zone or within protective enclosures.
The NAMUR sensor is a two wire device that operates on a constant voltage supply – usually 8V DC. Because the flow through the meter varies, the resistance of the sensor changes as well. Typical current trigger points are less than 1.2mA and greater than 2.1mA as the target passes over the sensor.
Due to their low power consumption and the ability to monitor resistance or current changes remotely, NAMUR sensors are widely used in specialist flow meters for hazardous zones. Output converters are available for standard signal compatibility.
NAMUR sensors are commonly employed in industries such as chemical processing, oil and gas refining and pharmaceutical manufacturing, where reliable signal transmission and intrinsic safety are essential.
Namur Sensor Features
Titan Enterprises Ltd
Tel: 01935 812790
www.flowmeters.co.uk
Titan Enterprises Limited
- 01935812790
- sales@flowmeters.co.uk
- http://www.flowmeters.co.uk
- Unit 2 5a Coldharbour Business Park, Sherborne Dorset, DT9 4JW GB
About us
With over 40-years experience in flow meter innovation, Titan Enterprises Ltd are a UK-based manufacturer of high performance solutions such as the Atrato ultrasonic flowmeter, Oval Gear flow meters and the low flow Turbine flow meters and instrument range.
Our knowledgeable team can offer either an off-the-shelf meter or fully bespoke flow system designed for a particular application whether it is a low cost OEM solution or a specialist flowmeter in exotic materials. Titan supplies innovative flow measurement solutions into a broad range of sectors, including medical, industrial, food and drink, laboratory and pharmaceutical, offshire oil & gas industry, power, chemicals and mining.
For higher volume users we can custom design a flowmeter to match exact application requirements and thus not compromise achievable results with a less than ideal sensor.
At Titan we endeavour to produce devices that are inherently reliable as well as manufactured using the latest and most economical production technology. All flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%.
We produce chemically resistant, high accuracy digital flow meters that are not only competitively priced but are engineered to give long-term reliable performance.
What we do in a nutshell
Titan Enterprises is a leading UK manufacturer and international supplier of high-performance liquid flow measurement solutions. We specialise in the design and production of small-bore, affordable off-the-shelf flow meters to bespoke flow sensors designed to customer specifications meeting specific flow ranges and environmental conditions.
Where we supply to
Europe, Africa, Asia, Australia, South America, North America
Industries we supply to
Automation, Chemicals, Consultants, Components Electronics, Energy and Power, Food and Beverage, Glass Ceramics Cement, Metals and Minerals, OEM, Paper and Pulp, Pharmaceutical Cosmetics Toiletries, Plastics and Rubber, Recycling, Textiles, Tobacco, Water and Wastewater
Something interesting you may not know about us:
Titan's R&D spend is 20% of our turnover where the industry norm is 8-10%.
-
Optimising Hydraulic Performance: Precision Flow Measurement Challenges
Titan Enterprises shares practical insights to help engineers and operators address the challenges of precision flow metering, ensuring accurate measurements...
-
Why Total Cost of Ownership (TCO) Is Greater Than Purchase Price in Flow Measurement Systems
Titan Enterprises stresses the intangible cost benefits of low-maintenance, long-life flow meter technology where performance is balanced with long-term value.When...
-
Customer Trials Drive New Development of Titan's Ultrasonic Drink Flowmeter
Titan Enterprises, a leading UK manufacturer of innovative flow measurement instruments, is crediting customer trials with driving the development of...
-
Flow Measurement for Hazardous Environments
Accurate and safe flow measurement in hazardous conditions relies on flowmeters equipped to meet strict compliance standards. These include Explosion...
-
OEMs Turn to Titan Enterprises for Sophisticated Flow Measurement Solutions
Original Equipment Manufacturers (OEMs) across various industries are progressively working with Titan Enterprises to solve difficult fluid measurement problems. Renowned...
-
Titan Enterprises Leads the Way with Green Strategies
Titan Enterprises leads innovation and sustainability with green strategic investments and robust UK-based supply chains.It may be challenging to balance...
-
Atrato Ultrasonic Flowmeter from Titan Enterprises, designed by Trevor Forster
